Mining CablesAS/NZS 2802 Type 455 Mining Cable
General use cable for mines (except for underground coal mines). Suitable to trailing and reeling due to its’ smaller dimensions.

Used as supply cable where mechanical protection and strenght is required in underground coal mines (except for shuttle cars)
Used as supply cable where mechanical protection and strenght is required in underground coal mines (except for shuttle cars)
| Rated voltage | 1.1/1.1 kV, 3.3/3.3 kV, 6.6/6.6 kV, 11/11 kV |
|---|---|
| Conductor | Electrolytic, stranded tinned copper wire AS/NZS 1125 Class 6 |
| Insulation | R-EP-90 (acc.to AS/NZS 3808) |
| Outer sheath | Heavy-duty elastomer outer sheath (acc.to AS/NZS 3808) |
| Separator | Semiconducting layer (3.3/3.3kV and above) (Except for pilot cores) |
| Separator | Semiconducting layer (3.3/3.3kV and above) (Except for pilot cores) |
| Screen | Tinned copper / Nylon braided screen over phase cores. |
| Layup | Cores are laid up over a semiconducting cradle without contacting each other, but in contact with interstitial pilot cores. |
| Bedding | Elastomeric compound |
| Armour | Galvanized steel pilable armour (acc. to AS/NZS 3863) |
| Related standards | AS/NZS 1802 |
| Test voltage | 4,2 kV, 12 kV, 22 kV, 30 kV |
| Power Cores | Core screen | Pilot core | Sheath | Sheath | Mass | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CROSS SECTION (mm2) | Strand no/mm | Conductor Diameter Nom. mm | Insulation thickness mm | Insulation diameter Nom. mm | Braid wires no/mm | Crosssection mm2 | Strand Min.no/mm | Insulation thickness Min.mm | Diameter over inner sheath mm | Armour wires no/mm | Diameter over armour mm | Inner sheath thickness mm | Outer sheath thickness mm | Overall diameter Nom. Mm | APPX. WEIGHT (kg / km) | COPPER WEIGHT (kg / km) |
| TYPE | 240.1 | 1.1/1.1kV | ||||||||||||||
| 16 | 126/0.40 | 5.7 | 1.6 | 9 | 7/0.25 | 9.6 | 39/0.30 | 1 | 32.7 | 7/0.90 | 38.1 | 2.5 | 4 | 46.5 | 4.1 | 824 |
| 25 | 209/0.40 | 7.2 | 1.6 | 10.5 | 7/0.25 | 11.3 | 63/0.30 | 1.2 | 35.9 | 7/0.90 | 41.3 | 2.5 | 4.3 | 50.4 | 4.95 | 1.181 |
| 35 | 285/0.40 | 8.5 | 1.6 | 11.8 | 7/0.25 | 12.4 | 87/0.30 | 1.2 | 38.7 | 7/0.90 | 44.1 | 2.5 | 4.6 | 53.8 | 5.65 | 1.55 |
| 50 | 380/0.40 | 10 | 1.7 | 13.5 | 7/0.25 | 14.1 | 114/0.30 | 1.2 | 42.4 | 7/0.90 | 47.8 | 2.5 | 5 | 58.4 | 6.65 | 2.091 |
| 70 | 203/0.67 | 12 | 1.8 | 16 | 7/0.25 | 16.5 | 36/0.67 | 1.2 | 47.8 | 7/0.90 | 53.2 | 2.5 | 5.4 | 64.6 | 8.35 | 2.889 |
| 95 | 259/0.67 | 13.2 | 2 | 17.6 | 7/0.25 | 18.2 | 36/0.67 | 1.2 | 53.3 | 7/0.90 | 58.7 | 3.5 | 6 | 71.4 | 10 | 3.658 |
| 120 | 336/0.67 | 15.3 | 2.1 | 20 | 7/0.25 | 20.3 | 39/0.67 | 1.4 | 58.3 | 7/0.90 | 63.7 | 3.5 | 6.4 | 77.2 | 11.8 | 4.47 |
| 150 | 427/0.67 | 17.1 | 2.3 | 22.2 | 7/0.25 | 22.3 | 48/0.67 | 1.4 | 63.1 | 7/0.90 | 68.5 | 3.5 | 6.9 | 83 | 13.7 | 5.513 |
| 185 | 518/0.67 | 19.2 | 2.5 | 24.7 | 7/0.30 | 30.2 | 63/0.67 | 1.4 | 69.1 | 7/0.90 | 74.5 | 3.5 | 7.4 | 90 | 16.1 | 6.84 |
| 240 | 672/0.67 | 21.8 | 2.8 | 27.9 | 7/0.30 | 33.6 | 77/0.67 | 1.6 | 78.2 | 7/1.25 | 85.7 | 4.5 | 8.2 | 103 | 21.5 | 8.664 |
| 300 | 854/0.67 | 24.4 | 3 | 30.9 | 7/0.40 | 50.1 | 98/0.67 | 1.6 | 86 | 7/1.25 | 93.5 | 4.5 | 8.8 | 112.1 | 25.9 | 11.08 |
| TYPE | 260.3 | 3.3/3.3kV | ||||||||||||||
| 16 | 126/0.40 | 5.7 | 3 | 12.5 | 7/0.25 | 13.1 | 39/0.30 | 1.4 | 40.3 | 7/0.90 | 45.7 | 2.5 | 5.3 | 56.9 | 5.6 | 925 |
| 25 | 209/0.40 | 7.2 | 3 | 14 | 7/0.25 | 14.8 | 63/0.30 | 1.4 | 43.5 | 7/0.90 | 48.9 | 2.5 | 5.6 | 60.8 | 6.5 | 1.282 |
| 35 | 285/0.40 | 8.5 | 3 | 15.3 | 7/0.25 | 15.8 | 87/0.30 | 1.4 | 48.5 | 7/0.90 | 53.9 | 3.5 | 5.9 | 66.3 | 7.75 | 1.648 |
| 50 | 380/0.40 | 10 | 3 | 16.8 | 7/0.25 | 17.2 | 114/0.30 | 1.4 | 51.7 | 7/0.90 | 57.1 | 3.5 | 6.3 | 70.4 | 8.75 | 2.181 |
| 70 | 203/0.67 | 12 | 3 | 18.8 | 7/0.25 | 18.6 | 36/0.67 | 1.4 | 56 | 7/0.90 | 61.4 | 3.5 | 6.6 | 75.3 | 10.3 | 2.95 |
| 95 | 259/0.67 | 13.2 | 3 | 20 | 7/0.25 | 20.3 | 36/0.67 | 1.4 | 58.6 | 7/0.90 | 64 | 3.5 | 7.1 | 78.9 | 11.5 | 3.719 |
| 120 | 336/0.67 | 15.3 | 3 | 22.1 | 7/0.30 | 27.2 | 39/0.67 | 1.6 | 63.8 | 7/0.90 | 69.2 | 3.5 | 7.4 | 84.7 | 13.4 | 4.669 |
| 150 | 427/0.67 | 17.1 | 3 | 23.9 | 7/0.40 | 39.6 | 48/0.67 | 1.6 | 71.1 | 7/1.25 | 78.6 | 4.5 | 7.8 | 95 | 17.7 | 6.011 |
| 185 | 518/0.67 | 19.2 | 3 | 26 | 7/0.40 | 42.2 | 63/0.67 | 1.8 | 75.6 | 7/1.25 | 83.1 | 4.5 | 8.2 | 100.4 | 19.9 | 7.186 |
| 240 | 672/0.67 | 21.8 | 3 | 28.6 | 7/0.40 | 46.6 | 77/0.67 | 1.8 | 81.2 | 7/1.25 | 88.7 | 4.5 | 8.8 | 107.3 | 23 | 9.038 |
| 300 | 854/0.67 | 24.4 | 3 | 31.2 | 7/0.50 | 63.2 | 98/0.67 | 1.8 | 88.1 | 7/1.25 | 95.6 | 4.5 | 9.4 | 115.4 | 27.1 | 11.457 |
| TYPE | 260.6 | 6.6/6.6kV | ||||||||||||||
| 16 | 126/0.40 | 5.7 | 5 | 16.5 | 7/0.25 | 17.2 | 39/0.30 | 1.4 | 51.2 | 7/0.90 | 56.6 | 3.5 | 6.4 | 70.1 | 7.95 | 1.043 |
| 25 | 209/0.40 | 7.2 | 5 | 18 | 7/0.25 | 18.6 | 63/0.30 | 1.4 | 54.5 | 7/0.90 | 59.9 | 3.5 | 6.7 | 74 | 8.95 | 1.392 |
| 35 | 285/0.40 | 8.5 | 5 | 19.3 | 7/0.25 | 18.6 | 87/0.30 | 1.6 | 57.3 | 7/0.90 | 62.7 | 3.5 | 7 | 77.4 | 9.85 | 1.728 |
| 50 | 380/0.40 | 10 | 5 | 20.8 | 7/0.25 | 21.3 | 114/0.30 | 1.6 | 60.5 | 7/0.90 | 65.9 | 3.5 | 7.3 | 81.2 | 11 | 2.299 |
| 70 | 203/0.67 | 12 | 5 | 22.8 | 7/0.25 | 23.4 | 36/0.67 | 1.6 | 66.9 | 7/1.25 | 74.4 | 4.5 | 7.7 | 90.7 | 14.5 | 3.088 |
| 95 | 259/0.67 | 13.2 | 5 | 24 | 7/0.30 | 29.2 | 36/0.67 | 1.6 | 70.2 | 7/1.25 | 77.7 | 4.5 | 8.1 | 94.8 | 16.1 | 3.975 |
| 120 | 336/0.67 | 15.3 | 5 | 26.1 | 7/0.30 | 31.7 | 39/0.67 | 1.8 | 74.7 | 7/1.25 | 82.2 | 4.5 | 8.5 | 100.2 | 18 | 4.799 |
| 150 | 427/0.67 | 17.1 | 5 | 27.9 | 7/0.40 | 45.7 | 48/0.67 | 1.8 | 79.8 | 7/1.25 | 87.3 | 4.5 | 8.9 | 106.2 | 20.8 | 6.187 |
| 185 | 518/0.67 | 19.2 | 5 | 30 | 7/0.40 | 48.4 | 63/0.67 | 1.8 | 84.4 | 7/1.25 | 91.9 | 4.5 | 9.3 | 111.5 | 23 | 7.365 |
| 240 | 672/0.67 | 21.8 | 5 | 32.6 | 7/0.40 | 52.8 | 77/0.67 | 1.8 | 90 | 7/1.25 | 97.5 | 4.5 | 9.9 | 118.4 | 26.3 | 9.216 |
| 300 | 854/0.67 | 24.4 | 5 | 35.2 | 7/0.50 | 71.5 | 98/0.67 | 1.8 | 96.9 | 7/1.25 | 104.4 | 4.5 | 10.4 | 126.3 | 30.6 | 11.696 |
| TYPE | 260.11 | 11/11kV | ||||||||||||||
| 25 | 209/0.40 | 7.2 | 7.6 | 23.4 | 7/0.25 | 23.7 | 63/0.30 | 2 | 68 | 7/1.25 | 75.5 | 4.5 | 8.1 | 92.7 | 13.8 | 1.538 |
| 35 | 285/0.40 | 8.5 | 7.6 | 24.7 | 7/0.30 | 30.2 | 87/0.30 | 2 | 71.5 | 7/1.25 | 79 | 4.5 | 8.4 | 96.7 | 15.3 | 2.063 |
| 50 | 380/0.40 | 10 | 7.6 | 26.2 | 7/0.30 | 31.7 | 114/0.30 | 2 | 74.7 | 7/1.25 | 82.2 | 4.5 | 8.7 | 100.6 | 16.6 | 2.598 |
| 70 | 203/0.67 | 12 | 7.6 | 28.2 | 7/0.30 | 34.1 | 36/0.67 | 2 | 79 | 7/1.25 | 86.5 | 4.5 | 9.1 | 105.8 | 18.6 | 3.396 |
| 95 | 259/0.67 | 13.2 | 7.6 | 29.4 | 7/0.40 | 47.5 | 36/0.67 | 2 | 82.9 | 7/1.25 | 90.4 | 4.5 | 9.6 | 110.7 | 20.8 | 4.502 |
| 120 | 336/0.67 | 15.3 | 7.6 | 31.5 | 7/0.40 | 51 | 39/0.67 | 2.2 | 87.4 | 7/1.25 | 94.9 | 4.5 | 9.9 | 115.8 | 22.9 | 5.354 |
| 150 | 427/0.67 | 17.1 | 7.6 | 33.3 | 7/0.40 | 53.7 | 48/0.67 | 2.2 | 91.3 | 7/1.25 | 98.8 | 4.5 | 10.3 | 120.5 | 25.1 | 6.417 |
| 185 | 518/0.67 | 19.2 | 7.6 | 35.4 | 7/0.40 | 57.2 | 63/0.67 | 2.2 | 95.8 | 7/1.25 | 103.3 | 4.5 | 10.7 | 125.9 | 27.5 | 7.618 |
Tell us your quantity and requirements — we reply within one business day.
Mining CablesGeneral use cable for mines (except for underground coal mines). Suitable to trailing and reeling due to its’ smaller dimensions.
Mining CablesGeneral use cable for mines (except for underground coal mines). It has smaller dimensions but strong structure.
Mining CablesGeneral use cable for mines (except for underground coal mines)
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.