These flexible low-voltage reeling cables are designed for power supply applications under high mechanical stresses. They are particularly suitable for use in cable reels, hoists, lifts, portable engines, traction motors,…
These flexible low-voltage reeling cables are designed for power supply applications under high mechanical stresses. They are particularly suitable for use in cable reels, hoists, lifts, portable engines, traction motors, agricultural equipment, and monospiral reeling applications, where frequent winding and unwinding occur. Specifically engineered for operations involving simultaneous tensile strain, torsional stress, and forced cable guidance, they are ideal for demanding applications such as Electrified Rubber Tyred Gantry (ERTG) cranes. These cables can be used in dry and wet conditions, outdoors, and in oily areas. Additionally, the textile braiding is embedded between the inner and outer sheath, enhancing durability and performance.
| Rated voltage | 600/1000 V (U0/U) |
|---|---|
| Conductor | Electrolytic annealed, class 5 stranded bare copper wires |
| Insulation | 3GI3 type cross-linked elastomeric compound (VDE 0207 – Part 20) |
| Outer sheath | 5GM5 type special rubber compound (VDE 0207 – Part 21) |
| Operating temperature | -40°C to +90°C |
| Core arrangement | Three-core design, with split earth conductor in the interstices, laid up with a left-hand lay. Special tape is applied over the core bundle. |
| Inner sheath | 5GM3 type special rubber compound (VDE 0207 – Part 21) |
| Reinforcement | Antitorsion textile braided embeded sheath |
| Construction | Based on VDE 0250-814 |
| General requirements | VDE 0250-1 |
| Guide to use | VDE 0298-3, VDE 0298-4 |
| Electrical tests | VDE 0472-501, 502, 503, 508 |
| Non-electrical tests | VDE 0472-401, 402, 602, 303, 615 |
| Conductor resistance | VDE 0295, IEC 60228 |
| Flame retardant | IEC 60332-1-2, VDE 0482-332-1-2 |
| Oil resistant | VDE 0473-811-404, EN 60811-404 |
| AC test voltage | 3,5 kV |
| Max. conductor operating temp. | 90°C |
| Conductor short-circuit | 250°C (Max. 5 sec) |
| Min. installation temp. | -15°C |
| Min. bending radius | VDE 0298-3 |
| Current carrying capacitiy | VDE 0298-4 |
| Max. tensile load on the conductor | 15 N/mm2 |
| Torsional stress | ± 50 °/m |
| Travel speed | Permitted running speed up 240m/min |
| * can | Cable Article Numb |
** Conductor temperature at 90 °C, Ambient air temperature at 30 °C
| CAN* | Cross-section (mm2) | Outer Sheath Diameter | Approx. Cable Weight (kg/km) | Min. Bending Radius Free moving (mm) | Current Carrying Capacity (**) (A) | Max. Electrical Resistance at 20°C (ohm/km) | ||
| Min. (mm) | Nom. (mm) | Max. (mm) | ||||||
| 4131.1 | 3×35 + 3×16/3 | 29,50 | 30,6 | 31,50 | 2.020 | 158 | 165 | 0,554 |
| 4131.2 | 3×50 + 3×25/3 | 35,00 | 36,4 | 37,00 | 2.878 | 185 | 205 | 0,386 |
| 4131.3 | 3×70 + 3×35/3 | 39,50 | 41,1 | 43,00 | 3.833 | 215 | 250 | 0,272 |
| 4131.4 | 3×95 + 3×50/3 | 43,50 | 45,3 | 46,00 | 4.838 | 230 | 300 | 0,206 |
| 4131.5 | 3×120 + 3×70/3 | 49,50 | 51,3 | 52,00 | 6.205 | 260 | 355 | 0,161 |
| 4131.6 | 3×150 + 3×70/3 | 53,00 | 54,9 | 56,00 | 7.283 | 280 | 405 | 0,129 |
| 4131.7 | 3×185 + 3×95/3 | 58,00 | 59,9 | 61,00 | 8.862 | 305 | 460 | 0,106 |
| 4131.8 | 3×240 + 3×120/3 | 66,50 | 68,7 | 70,00 | 11.577 | 350 | 540 | 0,0801 |
| 4131.9 | 3×300 + 3×150/3 | 72,00 | 74,7 | 76,00 | 14.152 | 380 | 620 | 0,0641 |
| 4131.10 | 3×400 + 3×240/3 | 83,50 | 86,2 | 88,00 | 18.393 | 440 | 720 | 0,0486 |
Tell us your quantity and requirements — we reply within one business day.
Crane & Reeling CablesThis cable is specially designed for mobile equipment operating under high to extreme mechanical stresses with integrated fibre optics for the combined transmission of energy and data It is engineered…
Crane & Reeling CablesThis cable is specially designed for mobile equipment operating under high mechanical stresses It is engineered to withstand high travel speeds, dynamic tensile loads, multi directional changes in movement across…
Crane & Reeling CablesThis cable is specially designed for mobile equipment operating under high to extreme mechanical stresses with integrated fibre optics for the combined transmission of energy and data It is engineered…
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.