Flameproof Heaters & Air Warmers | ATEX Zone 1 Zone 2 Hazardous Areas | EXHEAT FWD

Product Overview

ATEX Air Warmer | Zone 1 & Zone 2 (IIA, IIB, IIC) Zone 21 or 22 (IIIA, IIIB, IIIC)

Hazardous Areas & Explosive Atmospheres

ATEX Certified

Flameproof Air Warmers for Hazardous Area Heating

EXHEAT FWD flameproof heaters and air warmers provide hazardous area certified heating and air warming for Zone 1, Zone 2 (Flammable Gas) & Zone 21 and Zone 22 (Dust) hazardous areas and explosive atmospheres according to ATEX Directive.

The EXHEAT FWD range is designed to provide an air warming solution for small work or storage areas and can be provided with temperature ratings of T2, T3 and T4 (T Classes) – suitable for ambient temperatures from -60ºC to +60ºC

EXHEAT FWD flameproof air warmers are certified to meet ATEX equipment directive and IECEx standards and are suitable for wall or floor mounting.

Features of EXHEAT FWD Flameproof Heaters & Air Warmers

• Hazardous Area Certification – ATEX, IECEx, CU TR (EAC) and KGS standards
• Ingress Protection – fabricated carbon steel enclosure of the air warmers are weatherproof to IP66
• Temperature Classes – T2, T3 and T4 available (T Classes)
• Installation – suitable for horizontal floor or wall mounting
• Cable – 2 × 20mm (plugged) cable entries provided as standard
• Protection – corrosion resistant powder coated finish for industrial, harsh and hazardous area heating
• Options – T3 / T4 units suitable for ambient temperatures from -60ºC to +40ºC and T2 units to +60ºC
• Individually replaceable heating elements for safe heating in explosive atmospheres

ATEX Certification & Installation

Certification: ATEX / IECEx II 2 G/D
Ex d IIC T2 to T4 Gb suitable for Zones 1 and 2
Ex t IIIC T300 to T135°C Db suitable for Zones 21 and 22

ATEX / IECEx II 2 G/D
Ex d IIC T2 to T4 Gb suitable for Zones 1 and 2
Ex t IIIC T300 to T135°C Db suitable for Zones 21 and 22

CU TR (EAC)
1Ex db IIC T4…T2 Gb X
Ex tb IIIC T135°C…T300°C Db X

KGS certification available

Please download EXHEAT FWD hazardous area air warmers O&M manual for full details on installation and maintenance procedures – this includes wiring diagrams, earth connection and pre installation inspection and checks.

Prior to installing the EXHEAT FWD flameproof area air warmers a visual inspection must be carried out and the heater must be checked to ensure the insulation resistance reading is above 2MΩ per element at 500 volts dc.

If the heater fails this test the power and control circuits must be isolated.

To install the heater carefully remove from the packaging and check for damage. The air warmer should be fixed into place using the pre-drilled holes and all terminal connections checked for tightness prior to energising.

The appliance must be securely fitted to a wall or floor using only the brackets provided and the orientation of the heaters must be strictly adhered to with the heater tube remaining horizontal at all times.

EXHEAT FWD Flameproof Air Warmers – Applications

• Aircraft hangar service bays
• Fuel servicing areas
• Chemical plants
• Offshore installations
• Battery stores
• Gas installations
• Containers
• Explosive stores
• Paint / solvent stores
• Dusty environments
• Sugar refineries
• Firework factories
• Ammunition depots

Please download EXHEAT FWD hazardous area air warmers O&M manual for full details on installation and maintenance procedures – this includes wiring diagrams, earth connection and pre installation inspection and checks.

EXHEAT FWD Flameproof Air Warmers Product Range

These flameproof air warmers are suitable for Zone 1 & Zone 2 (IIA, IIB, IIC) gas groups.

Since 1985 as Leaders in ATEX Innovation we can facilitate succession planning for the replacement of obsolete, non-conformant and legacy equipment – we are the provider of innovative solutions to ensure ATEX and IECEx Compliance for Electrical, HVAC & Process Instrumentation systems in the explosive atmosphere industries.