Zone 1 LED Hazardous Area Lighting
Zone 1 LED Hazardous Area Lighting
ATEX Classification – Ex eb mb op is IIC Gb T4 Protection IP 65
Petrel 9 Series are high output LED luminaires suitable for Zone 1 hazardous area lighting applications with a range of sizes from 2-5ft with light output from 4,000lm up to 10,000lm.
Zone 1 LED luminaires are manufactured from heavy duty aluminium extrusion with polycarbonate end caps and diffuser, the three hour duration emergency models are fitted with integral batteries and charger units.
Access to lamps is via a single point locking mechanism and mounting is enabled using “quick fit” T bolts in a channel for maximum flexibility. The modern design of this extremely rigid Zone 1 LED luminaire allows unobtrusive use for both internal and external hazardous area lighting applications – Zone 2 LED version also available.
Zone 1
Supply voltage @230 VAC, mains impedance = 1Ω
In case of multi-pole CB the maximum number is reduced by 20%. The maximum number may differ depending on CB manufacturer. Please consult the manufacturer specifications.
Circuit Breakers with C characteristics are recommended for LED lighting circuits.
| Category | ATEX Lighting (Zone 1 & Zone 2) |
|---|
| LED Light Fitting Sizes – Petrel 9 Series | Zone 1 Light Description | Light Source | Nominal Light Output | Nominal Power Consumption | Size | Hazardous Area Certification |
| 9LED2700 | 2′ Exe LED Luminaire | LED | 4,000lm | 30W | 760mm | Zone 1 Ex eb |
| 9LED4700 | 4′ Exe LED Luminaire | LED | 8,000lm | 60W | 1,365mm | Zone 1 Ex eb |
| 9LED5700 | 5′ Exe LED Luminaire | LED | 10,000lm | 75W | 1,665mm | Zone 1 Ex eb |
| 9LED2700/EM | 2′ Exe Em Luminaire | LED | 4,000lm | 30W | 760mm | Zone 1 Ex eb |
| 9LED4700/EM | 4′ Exe Em Luminaire | LED | 8,000lm | 60W | 1,365mm | Zone 1 Ex eb |
| 9LED5700/EM | 5′ Exe Em Luminaire | LED | 10,000lm | 75W | 1,665mm | Zone 1 Ex eb |
| Label Marking | Ex eb mb op is IIC Gb T4, Ex tc op is T86ºC IIIB Dc |
| Certificate No. | CML 16ATEX3397X, IECEx CML 16.0149X |
| Zoned Areas | Zones 1, 2 & 22 |
| Ambient Range (Max) | -20ºC to +55ºC |
| IP Rating | IP65 to EN60529 |
| Supply Voltage | 110-240V, 50/60Hz |
| Material | Anodised corrosion resistant aluminium body with high impact polycarbonate diffuser, UV resistant |
| Cable Entries | 4 x M20 iso (3 plugged) as standard |
| Electrical Connections | 3 wire and earth cable size 4sqmm max. Through wiring versions available |
| Light Source | High efficiency LED |
| Light Output | Various ranging from 4,000lm – 10,000lm |
| Installation / Mounting | 2 x M8 quick fit bolts (supplied) for variable mounting centres |
| Control Gear | Electronic driver |
| Dimensions | Size 2 – 760mm x 193mm Size 4 – 1,365mm x 193mm Size 5 – 1,665mm x 193mm |
| Weight | Size 2 – 7kg Size 4 – 11.2kg Size 5 – 13kg |
| Model | typ.lpeak | Number of Luminaires Per Single Pole Circuit Breaker | ||||
| Type | 10A | 16A | 20A | 25A | ||
| 9LED2700 | 16.2A/184μ | B | 17 | 27 | 34 | 43 |
| C | 28 | 45 | 57 | 71 | ||
| 9LED4700 | 32.4A/184μ | B | 8 | 13 | 17 | 21 |
| C | 14 | 22 | 28 | 35 | ||
| 9LED5700 | 32.4A/184μ | B | 8 | 13 | 17 | 21 |
| C | 14 | 22 | 28 | 35 | ||
Tell us your quantity and requirements — we reply within one business day.
ATEX Lighting (Zone 1 & Zone 2)Contact our hazardous area lighting experts for design specification, technical advice, quotations, and fast delivery for both UK & export orders.
ATEX Lighting (Zone 1 & Zone 2)Below a prestigious project was won to supply lighting and distribution ATEX fully wired control panels for an upgrade of a major UK project.
ATEX Lighting (Zone 1 & Zone 2)The range of ATEX Lighting according to – the section outlines the complete range of hazardous area lighting products certified by ATEX to the Ex d Flameproof explosion protection concept.
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
