ATEX Light Fittings (Linear) | Zone 2 LED Hazardous Area Lighting

Product Overview

LED Light Fittings (Linear)

Linear Generation II | UKCA Approved

Light Fittings

Raytec SPARTAN Generation II Light Fittings (Linear) is a globally certified (ATEX, IEC Ex & UKEX) range of LED light fittings designed for all Zone 1 and Zone 2 hazardous area lighting environments – LED luminaires designed for all new Zone 1 and Zone 2 hazardous area installations or to retrofit existing fluorescent installations.

• Ultra Long Life LED Light Fittings
• High Lumen Light Output LED
• Certification: ATEX and IEC Ex rated for Zone 2 and 22 Gas and Dust. UKCA approved.

ATEX

Zone 2 Light Fittings ATEX Rating: ATEX IEC Ex rated & UKCA approved for Gas & Dust Explosive Atmospheres

Hazardous Area Rating: Zone 2 – Gas & Dust

The Raytec ATEX range of light fittings are certified according to international lighting classifications and approvals including ATEX, IECEx & UKCA according to the following types of explosion protection and codes:

Zone 2 Gas

• Gas: II 3 G D
• Ex ec mc IIC T4 Gc
• Ta= -40°C to+60°C
• (-20°C to +50°C for emergency variants)

T4 T5 T6 Temperature Ratings are available.

Zone 22 Dust

• Ex tc IIIC T80°C Dc
• Ta= -40°C to+60°C
• (-20°C to +50°C for emergency variants)

Specification

• ATEX & IEC Ex approved – Zone 2 (Gas) & Zone 22 (Dust)
• UKCA approved
• Intelligent Emergency Variants
• Ultra Long Life LED
• High Lumen Output LED
• Fully Retrofittable
• Easy Installation and Maintenance
• Wide Operating Temp -40° to +60°
• Zone 1 Variants available
• 5 Year Warranty
• UK Designed and Manufactured

LED Light fittings Zone 2

Hazardous Area LED Lighting

Zone 2 hazardous area lighting products are manufactured in the UK by Raytec and are ATEX and IEC Ex approved and supplied with a 5 year warranty – a full family of ATEX lighting products includes SPARTAN Flood, Linear, Bulkhead, High Bay and Crane Floodlights for Zone 2.

LED light fittings provide high performance, high specification, hazardous area lighting delivering world class leading performance and reliability and compliance with international classifications including ATEX, IEC Ex & UKEX.

Spartan Flood, The LED Zone 2 Light fitting

Design

The lighting design service will provide recommendations on the product type and number of lights required including the average, maximum and minimum light levels that can be achieved in accordance with ATEX and IEC Ex compliance.

Additional Features

LED Lighting – Zone 2 SPARTAN light fittings use CoolExtrude thermal management technology, ensuring a much cooler LED operating temperature. This provides up to 60% better heat dissipation compared to traditional lighting solutions and allows the floodlight product to operate for 10+ years in the most challenging environments.

Retrofittable – SPARTAN Linear for Zone 2 hazardous area is a direct replacement for fluorescent fittings, meaning you can upgrade to LED light without complication.

Flexible Installation & Easy Maintenance – the modular design allows great flexibility: the entire PSU chassis can be removed and located remotely at ground level for areas with difficult access. Additionally the individual PSU modules can be easily accessed and replaced making servicing and inspection of all key components within the Zone 2 light fitting quicker and easier.

Automatic Self-Testing – the intelligent emergency system ensures 100% light output is maintained during all testing procedures, while discharge cycles occur randomly every 3 months and always retain around a third of the battery’s charge, so you’re never left with a total loss of light. The health status of the luminaire is communicated through the LED indicator.

SPARTAN Linear light fittings are designed for Zone 2 hazardous area installations or to retrofit existing fluorescent installations which require high performance, reliable, White-Light illumination.

The Light Fittings have been designed by Raytec to light up large and open areas and is supplied with an integral dedicated bracket allowing the beam angle of light to be tilted and easily targeted into the required space.

Raytec’s field-proven, long-life LED technology SPARTAN light fittings are ATEX and IEC Ex approved for all Zone 2 hazardous area lighting applications – watch the video to learn how high lumen output is provided by the latest high performance LED technology delivering low running costs and low energy consumption.

♦ See also Zone 1 light fittings and our complete range of ATEX Lighting.

Lighting Designs For Hazardous Areas

Upgrading Plant Legacy Lighting to LED

Using latest software our FREE Lighting Design Service supports the upgrade from fluorescent to LED lighting focussed on maximised light output, optimised energy consumption with reliable and safe certification for explosion protection concepts in Zone 1 and Zone 2 hazardous area zones and workplaces.