CNC Turret LathesCNC Machine Tools
C200-500 CNC Turret Lathe
C200-500 CNC Turret Lathe: maximum turning diameter Ø480 mm, maximum turning length 625 mm, bar capacity Ø52 mm, spindle speed 4500 rpm. Request a quote.
Ø480 mm · 625 mm · Ø52 mm
C300-1000 CNC Turret Lathe
C300-1000 CNC Turret Lathe: maximum turning diameter Ø600 mm, maximum turning length 1000 mm, bar capacity Ø72 mm, spindle speed 3500 rpm. Request a quote.
Maximum turning diameterØ600 mm
Maximum turning length1000 mm
Bar capacityØ72 mm
Spindle speed3500 rpm
- Quoted to your quantity
- Documentation on request
- International delivery
Product Overview
The C300-1000 is a slant-bed CNC turret lathe for precision production turning. A rigid one-piece cast-iron bed, linear guideways and a fast-indexing turret give stable cutting and short tool-change times.
C300-1000 at a glance
Maximum turning diameter Ø600 mm, maximum turning length 1000 mm, bar capacity Ø72 mm, spindle speed 3500 rpm and X/Z travel 320/1180 mm.
Further key data: positioning accuracy 0.008/1000 mm; repeatability ≤0.005 mm; turret MK-125SV-12T-440; spindle drive Synchronous Belt Pulley Drive. The machine is equipped with SYNTEC 22TA CNC control.
Quality components
Key components come from established suppliers: SYNTEC (CNC control, servo motors); NSK (spindle bearings, ball screw bearings); THK (guideways, ball screw); SANLIU (fixture, hydraulic cylinder); SCHNEIDER (electrical components); MYKUN (turret); ISHAN (lubrication pump).
Built for production turning
The slant-bed layout lets chips fall away from the cutting zone, while the turret indexes quickly between tools. A tailstock with programmable quill supports long shafts, and chuck-based or bar-fed work can be set up quickly between batches.
Configured around your part
Options such as a bar feeder, part catcher, tool setter, chip conveyor, oil-mist collector and linear encoders let you adapt the lathe to your parts and level of automation. Send your drawing and we will confirm chuck size, tooling and workholding.
Available options for the C300-1000 include high-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher and chip conveyor.
Frequently asked questions
What are the main specifications of the C300-1000?
Maximum turning diameter Ø600 mm, maximum turning length 1000 mm, bar capacity Ø72 mm, spindle speed 3500 rpm and X/Z travel 320/1180 mm. The full data is in the specification table on this page.
Which CNC control does the C300-1000 use?
It is equipped with SYNTEC 22TA CNC control.
Which options are available for the C300-1000?
High-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher, chip conveyor, oil-water separator and linear encoder.
How do I get a quotation for the C300-1000?
Send us your part drawing, material, tolerances, batch size and delivery address through the quote form. We reply with a configuration, price and lead time for delivery to your site in Europe.
Interested in the C300-1000? Send your drawing and requirements and we will reply with a configuration and quotation. Request a quote. See all CNC turret lathes.
Technical Specifications
| Maximum turning diameter | Ø600 mm |
|---|---|
| Maximum turning length | 1000 mm |
| Bar capacity | Ø72 mm |
| Spindle speed | 3500 rpm |
| Machine type | CNC turret lathe |
| CNC control | SYNTEC 22TA |
C300-1000 – technical specifications
| Specification | C300-1000 |
|---|---|
| Machining Capacity | |
| Maximum Swing Diameter Over Saddle | Ø700 mm |
| Maximum Turning Diameter | Ø600 mm |
| Standard Turning Diameter | Ø260 mm |
| Swing Diameter Over Cross Slide | Ø584 mm |
| Maximum Turning Length | 1000 mm |
| Chuck Size | 12″ |
| Bar Capacity Diameter | Ø72 mm |
| Spindle | |
| Spindle Nose Type | A2-8 |
| Spindle Bearing Model | NN3024+120B+NN3022 |
| Spindle Through Hole Diameter | Ø86 mm |
| Spindle Drive Method | Synchronous Belt Pulley Drive |
| Spindle Transmission Ratio | 1:2 |
| Maximum Torque | 384 Nm |
| Maximum Spindle Speed | 3500 rpm |
| Axis Travel & Accuracy | |
| Maximum Travel of X/Z Axis | 320/1180 mm |
| Rapid Feed Rate of X/Z Axis | 25 m/min |
| Guideway Type of X/Z Axis | 45 mm Linear Guide Way |
| Ball Screw Diameter/Pitch of X/Z Axis | Ø40/50 mm/Pitch10 |
| Positioning Accuracy of X/Z Axis | 0.008/1000 mm |
| Repeatable Positioning Accuracy of X/Z Axis | ≤0.005 mm |
| Motor Power | |
| X Axis Motor | 3.1KW(AM15) |
| Z Axis Motor | 3.1KW(AM15) |
| Spindle Motor | 15KW(M19) |
| Hydraulic Station | 2.2 kW |
| Water Pump | 0.55 kW |
| Air Conditioner | 0.3 kW |
| Turret | |
| Turret Model | MK-125SV-12T-440 |
| Tool Change Time (Adjacent Tool / Opposite Tool) | 0.27sec/0.57sec |
| Square Tool Holders | 25 mm |
| Round Tool Holders | Ø40 mm |
| Tailstock | |
| Spindle Internal Taper | MT#5 |
| Core Axis Control Method | Hydraulic Sleeve Type |
| Tailstock Body Travel | 2000 mm |
| Tailstock Body Movement Method | Mechanical |
| Other Specifications | |
| Standard CNC Controller | SYNTEC(FANUC Optional) |
| Voltage/Power Requirements | 380V/30 kVA |
| Hydraulic Tank Capacity | 55L |
| Overall Dimensions (L × W × H) | 6375×1970×2226 mm |
| Equipment Weight | 7600KG |
Key components and brands
| Item Name | Model/Specification | Brand |
|---|---|---|
| CNC System Controller | SYNTEC 22TA | SYNTEC |
| Servo Drive Motor | AM15(X)AM15(Z) | SYNTEC |
| Spindle Bearings | NN3024+120B+NN3022 | NSK |
| Guideways | HSR45(X),HSR45(Z)(H2 Grade) | THK |
| Ball Screw | EBB4010(X),EBB5010(Z)(C3 Grade) | THK |
| Fixture | X3-10A8 | SANLIU (China) |
| Hydraulic Cylinder | XH-1075T | SANLIU (China) |
| Electrical Components | LC1N0910M5N(AC Contactor) | SCHNEIDER |
| Turret | MK-125SV-12T-440 | MYKUN (Taiwan) |
| Ball Screw Bearings | 2562(X) 3062(Z) | NSK |
| Lubrication Pump | YET-V2P2 220V | ISHAN (Taiwan) |
| Control Cabinet Cooling | EA-300-1225 | WINHEE (China) |
| Machine Bed | Meehanite Cast Iron One-piece Slant Bed with Electro-Hydraulic Integration | In-house |
| Hydraulic Components | Hydraulic Station Assembly | HOMN/HYKO |
| Chip Conveyor | Side and Rear Chain-Type Automatic Chip Conveyor | JIBAO |
Dimension and interference drawings
Specifications may change. The final configuration is confirmed in our quotation.
Applications
- Shafts, flanges and bushings
- Automotive and hydraulic components
- Valve and pump parts
- Bar-fed production turning
- General subcontract machining
Features
- Rigid one-piece slant bed in cast iron
- Linear guideways and precision ball screws
- Fast-indexing turret
- Tailstock with programmable quill
- FANUC CNC control
Available Options
Request Information About This Product
Tell us your quantity and requirements — we reply within one business day.
Related Products
CNC Turret Lathes
CNC Turret LathesCNC Machine Tools
C250-500 CNC Turret Lathe
C250-500 CNC Turret Lathe: maximum turning diameter Ø480 mm, maximum turning length 625 mm, bar capacity Ø72 mm, spindle speed 3000 rpm. Request a quote.
Ø480 mm · 625 mm · Ø72 mm
CNC Turret LathesCNC Machine Tools
C250-1000 CNC Turret Lathe
C250-1000 CNC Turret Lathe: maximum turning diameter Ø600 mm, maximum turning length 1000 mm, bar capacity Ø72 mm, spindle speed 3500 rpm. Request a quote.
Ø600 mm · 1000 mm · Ø72 mm
Have a product requirement?
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.