Back-pull-out end suction pump to ISO 2858 / ISO 9908: up to 1500 m³/h and 160 m, -15 to +104 °C, sealed-for-life bearings. Interchangeable with standard pumps.
A high-efficiency end-suction pump for clean or slightly aggressive water, built to ISO 2858 dimensions so it can replace equivalent European pumps without changing the base or the pipework. The performance range is wider than the standard: about 1.6 times the flow and up to 1.8 times the head at the same speed.
Sealed-for-life, grease-free bearings run maintenance-free for their whole service life. The back pull-out design lets the rotor be removed from the drive end while the casing stays in the line. The impeller is fitted on a tapered shaft seat for accurate, secure location.
The whole range uses only four bearing housings, four shafts and ten pump covers, which keeps your spare-parts stock small.
Hydraulics designed in 3D CAD and verified with CFD give good suction performance and efficiency; the range holds an energy-saving product certificate.
Yes, the main dimensions follow ISO 2858, so it normally fits the existing baseplate and pipework.
Clean water or slightly corrosive liquids without solids or fibres, -15 to +104 °C; stainless wetted parts are available.
Flow rate, head or vacuum level, the liquid or gas and its temperature, required materials, motor voltage and frequency, and any standard or ATEX zone. A data sheet or the nameplate of an existing pump is ideal.
Need a quotation for the End Suction Centrifugal Pump ISO 2858? Send us your requirements and the delivery address – we reply with a technical proposal, price and lead time. Request a quote.
| Standard | ISO 2858 dimensions, ISO 9908 technical requirements |
|---|---|
| Flow | up to 1500 m³/h |
| Head | up to 160 m |
| Casing pressure | max. 1.6 MPa at 20 °C |
| Liquid temperature | -15 to +104 °C |
| Design | Back pull-out, single mechanical seal |
Tell us your quantity and requirements — we reply within one business day.
Water, HVAC & Wastewater PumpsClose-coupled monoblock pump to ISO 2858 / ISO 9908: up to 400 m³/h and 160 m, 1.6 MPa, 22 sizes. Compact pump for HVAC, fire fighting and water supply.
Water, HVAC & Wastewater PumpsEconomical EN 733 (ex DIN 24255) end suction pump, 42 models, cast iron, bronze or 316 stainless. For water supply, HVAC, fire fighting and irrigation.
Water, HVAC & Wastewater PumpsLow-noise HVAC chilled-water pump to EN 733 / ISO 9908: 9–1080 m³/h, 13–56 m, -10 to +104 °C, ductile iron casing, bronze wear rings. For air conditioning.
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
