Vertical in-line pump: suction and discharge on one axis, 50% less floor space. Cold water 2.4–410 m³/h, hot-water version to 960 m³/h, 150 m and 130 °C.
The in-line pump installs directly in the pipeline like a valve: suction and discharge are on the same axis, and pump and motor share one shaft, so there is no alignment work. It needs more than 50 % less floor space and is about 30 % lighter than a comparable end-suction pump.
Because no baseplate, coupling or special adaptors are needed, purchase and installation costs are typically more than 30 % lower than for conventional single-stage pumps with the same performance. The pump can be installed vertically or horizontally.
The standard version handles clean water up to 80 °C. The hot-water version uses a high-temperature mechanical seal and reaches 130 °C and 150 m head for heating, boiler and hot/chilled-water circulation.
Cast iron casing, impeller and adaptor as standard; copper alloy, stainless steel and premium mechanical seals on request.
Yes, it can be installed vertically or horizontally in the pipeline.
80 °C for the standard version and 130 °C for the hot-water version.
Flow rate, head or vacuum level, the liquid or gas and its temperature, required materials, motor voltage and frequency, and any standard or ATEX zone. A data sheet or the nameplate of an existing pump is ideal.
Need a quotation for the Vertical In-Line Centrifugal Pump? Send us your requirements and the delivery address – we reply with a technical proposal, price and lead time. Request a quote.
| Design | Vertical close-coupled, in-line branches, common pump/motor shaft |
|---|---|
| Cold-water version | 2.4–410 m³/h, 8–50 m, < 80 °C |
| Hot-water version | 2.4–960 m³/h, 8–150 m, < 130 °C |
| Pressure rating | < 1.0 MPa |
| Speed | 1450 (1480) or 2900 rpm |
| Motor | Class F insulation, extended shaft |
Tell us your quantity and requirements — we reply within one business day.
Water, HVAC & Wastewater PumpsBack-pull-out end suction pump to ISO 2858 / ISO 9908: up to 1500 m³/h and 160 m, -15 to +104 °C, sealed-for-life bearings. Interchangeable with standard pumps.
Water, HVAC & Wastewater PumpsClose-coupled monoblock pump to ISO 2858 / ISO 9908: up to 400 m³/h and 160 m, 1.6 MPa, 22 sizes. Compact pump for HVAC, fire fighting and water supply.
Water, HVAC & Wastewater PumpsEconomical EN 733 (ex DIN 24255) end suction pump, 42 models, cast iron, bronze or 316 stainless. For water supply, HVAC, fire fighting and irrigation.
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
