Liquid Ring Compressor – High Pressure

Double-suction liquid ring compressor: 1–150 m³/min, discharge to 0.7 MPa(g), zero axial force, duplex shaft, mechanical or dry gas seal. For refinery gas.

Capacity1–150 m³/min
Discharge pressure0–0.7 MPa(g)
DesignSymmetrical double-suction, double-discharge impeller
ShaftDuplex stainless 1.4462, bearings at both ends
  • Quoted to your quantity
  • Documentation on request
  • International delivery

Product Overview

For gas recovery at higher pressure and moderate flow, this liquid ring compressor reaches 0.7 MPa(g). A symmetrical double-suction, double-discharge impeller cancels axial force and gives very smooth running.

Rigid, balanced rotor

The shaft is duplex stainless 1.4462, supported at both ends by cylindrical roller bearings, with angular-contact bearings for axial location. Impellers are dynamically balanced and O-rings seal the casing for high pressure.

Sealing for hazardous gases

Single or double mechanical seals or dry gas seals can be fitted. Open end shields and impeller make maintenance simple.

Typical services

Recovery of atmospheric-tower and primary-tower gas in refineries, nitrous gas compression in adipic acid plants, dry chlorine and hydrogen in chlor-alkali plants, flare-gas recovery, salt-mine flue gas and gas compression on offshore platforms.

Frequently asked questions

Can it compress dry chlorine?

Yes, it is used for dry chlorine and dry hydrogen in chlor-alkali plants with suitable materials and service liquid.

Which seals are possible?

Single or double mechanical seals or dry gas seals.

What information do you need for a quotation?

Flow rate, head or vacuum level, the liquid or gas and its temperature, required materials, motor voltage and frequency, and any standard or ATEX zone. A data sheet or the nameplate of an existing pump is ideal.

Need a quotation for the Liquid Ring Compressor – High Pressure? Send us your requirements and the delivery address – we reply with a technical proposal, price and lead time. Request a quote.

Technical Specifications

Capacity1–150 m³/min
Discharge pressure0–0.7 MPa(g)
DesignSymmetrical double-suction, double-discharge impeller
ShaftDuplex stainless 1.4462, bearings at both ends
SealsSingle or double mechanical seal, dry gas seal
MaterialsSS304, 304L, 316L, duplex

Applications

  • Refinery tower-gas recovery
  • Chlor-alkali dry chlorine and hydrogen
  • Adipic acid nitrous gases
  • Flare-gas recovery
  • Offshore oil-gas compression

Features

  • Up to 0.7 MPa(g)
  • Zero theoretical axial force
  • Duplex 1.4462 shaft, bearings both ends
  • Dry gas seal option
  • Stainless and duplex wetted parts

Request Information About This Product

Tell us your quantity and requirements — we reply within one business day.

Related Products

Have a product requirement?

Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.