Suitable for applications in elevators handling products of up to 150˚C and short peaks of 180˚C. Used in the cement, coal, dry chemicals, fly ash industries. Use special 3+3 covers to prevent…
Brand4B
Part numbersEPDM800/4 3+3 T150
Belt PropertiesFlame Resistant, Wear Resistant, Anti-Static
Suitable for applications in elevators handling products of up to 150˚C and short peaks of 180˚C. Used in the cement, coal, dry chemicals, fly ash industries. Use special 3+3 covers to prevent heat reaching the carcass. For further advice contact technical department.
Technical Specifications
Brand
4B
Part numbers
EPDM800/4 3+3 T150
Belt Properties
Flame Resistant, Wear Resistant, Anti-Static
Temperature
-20˚C to +150˚C
Belt type
Belt Thickness
Approximate Weight
Minimum Pulley Dia
T150
(mm)
(kg/sqm)
(mm)
EPDM800/4 3+3 T150
11.3
12
500
Technical Specifications
Product Norm: DIN 22102 ETY
E = anti-static DIN 22104
T = heat resistant up to 150°C, EPDM covers and plies resistant to mineral oils at low temperatures, resistant to acids and lyes in low concentrations
Y = good abrasion resistance according to DIN 53516
Elongation at maximum recommended working load 2.5% at high temps
Features
Hot industrial products
Used in cement, coal, dry chemicals, fly ash industries
4B elevator belting is of laminar construction, to give high impact resistance coupled with low stretch at working tension. The EP carcass comprises a woven textile construction having low stretch polyester fabric…
Recommended for use in equipment/installations where there is a risk of fire or explosion. Suitable for handling cereals and products with moderate levels of oil, such as soya.
Flame retardant, anti-static and oil resistant elevator belt