Zone 1 Zone 2 (21/22) Hazardous Area LED Luminaire Lighting ATEX – Appleton DEMULED

Product Overview

Zone 1 Zone 2 (21/22) Hazardous Area LED Luminaire Lighting ATEX – Appleton DEMULED

Appleton DEMULED is part of the Zone 1 Zone 2 (21/22) hazardous area LED luminaire ATEX lighting range that are specifically designed for use in hallways and stairwells to clearly illuminate exit routes.

The Appleton DEMULED has a one hour power supply providing 45 lumens during emergency situations. This allows all employees to safely exit when there is no power going to the unit during an evacuation in hazardous areas.

Provides adequate lighting suitable for almost any hazardous and industrial environments in Zone 1, 2, 21 and 22 – providing hazardous area lighting with savings on installation, maintenance and energy costs due to the compact and efficient design.

The ATEX certified LED luminaires are suitable for use indoor or outdoors where protection against dirt, water and moisture is essential. Typical applications include oil refineries, petrochemical facilities and pulp and paper mills.

Features & Benefits

• All versions:
  • Power supply 230 Vac, 50 Hz
  • 1 hour duration (emergency)
  • Threaded access cover with O-ring seal
  • Battery pack :
  • Escape route lighting: 2.4 V – 0,8 Ah (2 cells – Nicd)
  • Space lighting: 6 V – 1,6 Ah (6 cells – Nicd)
  • Charge indicator by 1 green LED (life time over 10 years).
  • Luminaire operates in any position.
  • Connection to plug-in terminal block via 5 x 2.5 mm2 (0.004 in2) terminals.
  • Supplied with two fixing brackets (zinc plated steel)
  • Automatic built-in self-test system (SATI) with memorization of tests indicated by LEDs.
  • Using a microprocessor and an internal clock, the unit will carry out automatic tests.
  • Escape route lighting: 45 lumens, 0.50 wattage.
  • Hazardous area space lighting: 400 lumens, 0.95 wattage.
• Addressable versions:
  • Operates without additional control lines. Communication between units and the control system is realized via mains borne signals that utilize the existing electrical wiring
  • Standard control system capacity: one control system for up to 200 emergency lighting units
  • Optional increased control system capacity: booster (repeater unit) is used to increase the length of the network allowing up to 1000 emergency lighting units to be on one control system. This allows for the use of a single computer to centralize the management of the facilities emergency lighting system. For more information, please contact your local sales representative

Zone 1 Zone 2 (21/22) Hazardous Area LED Luminaire Lighting ATEX – Appleton DEMULED

Technical Data

Zone 1 Zone 2 (21/22) Hazardous Area LED Luminaire Lighting ATEX – Appleton DEMULED Dimensions

ATEX/IECEx Certifications for hazardous areas

• ATEX/IECEx:
  – Zone 1 and 2 – 21 and 22
  – II 2 GD
  – Ex tb IIIC
  – IK09
  – IP66/68

IECEX

IECEX INE 15.0046X

ATEX

INERIS 15 ATEX 0042X