TECHNOR (part of the Marechal Electrical Group) expertly engineer a range of grey polycarbonate IECEx & ATEX approved LED Linear Lighting L2EX, purposed for use in Hazardous Area Explosive Atmospheres, specifically in…
TECHNOR (part of the Marechal Electrical Group) expertly engineer a range of grey polycarbonate IECEx & ATEX approved LED Linear Lighting L2EX, purposed for use in Hazardous Area Explosive Atmospheres, specifically in Zone 2 (gas) & Zone 22 (dust). The TECHNOR LED Linear Lighting L2EX fixtures, suitable for corrosive industrial environments with danger of explosive gas, dust and combustible fumes, are equipped with UV and impact resistance, allowing for extensive outdoor use if required.
LED Linear Lighting Range | TECHNOR
We also feature and supply several variations of TECHNOR LED Linear Lighting, including LED Linear Lighting EVF & Linear LED Lighting EVF2, both available in GRP or Copper-free Aluminium models, for use in potentially explosive atmospheres in Zone 1 & Zone 2 (gas) and Zone 21 & Zone 22 (dust).
LED Linear Light EVF | Linear LED Lighting EVF2
The following table provides a further insight on TECHNOR‘s LED Linear Lighting L2EX Hazardous Area ATEX variants:
LED Linear Lighting L2EX Product Range | Lighting Fixtures For Normal And Emergency Service
TECHNOR, part of the MARECHAL group, are world specialists in Hazardous Area Lighting equipment, engineered solutions for industrial and Ex environments. TECHNOR offer a wide variety of Ex Lighting products alongside the LED Linear Lighting EVF range, including Linear Fluorescent Lighting, EV Wellglass Lighting, LED Spotlight, Floodlight Lighting, LED Lanterns, Lamps, Lanterns and more.
| Category | ATEX Lighting (Zone 1 & Zone 2) |
|---|
| L2EX Technical Specifications | |
| Material | Grey polycarbonate (PC), UV stable, impact-resistant |
| IP/IK Rating | IP66 |
| Ambient Temperature Range | Maximum ambient temperature ‘-25°C up to +55°C |
| Approvals | TNI 23ATEX 0008X |
| Zones | Gas Zone: 2 Dust Zone:22 |
| Rated Voltage | 220-250 VAC (normal & emergency service) |
| Frequency | 50-60 Hz |
| Colour Rendering Index | >80 CRI |
| Colour Temperature | 4.000 K (other colour upon request) |
| Power Factor | cos φ > 0,98 |
| LED Lifetime (L90B10) Ta+40°C | 50.000 h according to IES L90/B10 |
| Hardware and Screws | AISI304 stainless steel |
| Coating | Unpainted |
| Entries | 2x opposite entries M20 x 1,5 suitable for 4 entries (upon request) |
| Through Wiring | Loop-in / Loop-out possibility |
| Plug | 1 x plastic dustproof plug for M20 entry protection 1 x M20 polyamide/Brass nickel chrome plug c/w gasket (mounted) |
| Accessories Upon Request | Emergency kit 3h Wall, ceiling and suspension mounting kit |
| L2EX Code | Product Type | Power [W] | Lumen [lm] | Lum. Eff [lm/W] | Dimensions [mm] | Weight [kg] | |||
| A | B | C | D | ||||||
| A025061610001 | L2EX LED-2200/840 | 16 | 2.560 | 147 | 662 | 350 | 145 | 111 | 2.00 |
| A025063210001 | L2EX LED-4400/840 | 31 | 5.070 | 150 | 1272 | 700 | 145 | 111 | 3.30 |
| A025065410001 | L2EX LED-8000/840 | 53 | 9.030 | 150 | 1572 | 940 | 145 | 111 | 4.20 |
| A025061610002 | L2EX LED-2200/840 M3H | 16 | 2.560 | 147 | 662 | 350 | 145 | 111 | 2.78 |
| EMERGENCY SERVICE: 180′ | 500 | ||||||||
| A025063210002 | L2EX LED-4400/840 | 31 | 5.070 | 150 | 1272 | 700 | 145 | 111 | 4.50 |
| EMERGENCY SERVICE: 180′ | 500 | ||||||||
| A025065410002 | L2EX LED-8000/840 | 53 | 9.030 | 150 | 1572 | 940 | 145 | 111 | 5.50 |
| EMERGENCY SERVICE: 180′ | 500 | ||||||||
Tell us your quantity and requirements — we reply within one business day.
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
