The Pullswitch is a failsafe taut wire emergency pull cord safety stop switch for open conveyors.PVC coated steel pull wires and pigtails connect between the switches to provide easy installation and continuous…
The Pullswitch is a failsafe taut wire emergency pull cord safety stop switch for open conveyors.
PVC coated steel pull wires and pigtails connect between the switches to provide easy installation and continuous emergency stop access along the length of the entire conveyor. Pullswitches can be installed at 50m intervals, reducing overall system cost. Quick location of a tripped switch is provided by a standard reflector or optional flag marker, and the tripped signal can be wired back to an indicator panel or PLC.
The Pullswitch is a taut wire device, so if wire tension is lost the unit will trip. This design provides a secondary level of safety protection if the pull wire is damaged, or becomes slack.
The Pullswitch’s IP65 / NEMA 4, 4X, 9 rated enclosure is made from polycarbonate and stainless steel, making the housing corrosion resistant and weatherproof. A total of six positive break contacts inside the Pullswitch offer unique operation and control. Two independent cam operated switches with snap action mechanical operation are provided for conveyor shutdown, and four additional micro-switches signal for a slack wire alarm.
| Brand | 4B |
|---|---|
| Part numbers | PST2000A |
| Application | Belt Conveyor |
Technical Specifications - PST2000A:
Tell us your quantity and requirements — we reply within one business day.
Junction BoxesFor use on any application where an ATEX, IECEx or CSA approved junction box is required. The HOTBOX Junction box is an CSA, ATEX and IECEx approved terminal box which complies with…
Junction BoxesThe D5M Inline Junction Box is a compromise between a junction box and a proprietary connector for sensors. The method of mounting allows for the easy installation of sensors in any industrial…
Alignment SensorsThe Bulldog alignment and rip detection switch is an electro-mechanical system designed to detect dangerous misalignment of the conveyor and also detection of belt tear damage. The switch will detect horizontal misalignment…
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.