The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained…
The M300 Slipswitch is an easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft speed has dropped by 20% of normal running speed. It is used for detecting dangerous slow down and underspeed conditions on conveyors, bucket elevators, air locks, mixers, fans, grinders and many other machines.
No connection is necessary between the sensor and the equipment being monitored. The proximity sensor detects a stud or bolt mounted on a shaft, or other suitable target. Ideally, the target should be of ferrous metal, but non-ferrous metal will be detected at a shorter range. Maximum range of ferrous targets is 8 mm (5/16”) and for non-ferrous targets is 5 mm (6/16”), assuming a 20 mm (3/4”) diameter target. Smaller targets may be used but operating distances will be reduced.
| Brand | 4B |
|---|---|
| Part numbers | M3003V10AI, M3008V10AI, M3007V10AI |
| Application | Belt Conveyor, Bucket Elevator |
| | ||
| Specification | Value | |
| Supply Voltage: | 24 to 240 VAC/VDC | |
| Supply Fusing: | Supply to be fused at 500mA maximum | |
| Switching Capacity: | M3003V10AI: 100 mA maximum; M3007V10AI: 60VDC/VAC, 3A | |
| Saturation Voltage: | M3003V10AI: 5.5 Volts maximum (output on); M3007V10AI: N/A | |
| Leakage Current: | M3003V10AI: 1.6 mA maximum (output off); M3007V10AI: N/A | |
| Ambient Temperature: | 5°F (-15°C) to +122°F (+50°C) | |
| Output State: | M3003V10AI: FET; M3007V10AI: SPCO relay | |
| Sensing Range: | 5/16” (8 mm) maximum on ferrous metal at 77°F (25°C) | |
| Input Pulse Range: | 10 to 3,600 pulses per minute (PPM) maximum | |
| Start-Up Delay: | Adjustable - 0 to 30 seconds | |
| Trip Point: | 20% below set speed | |
| Enclosure: | Nylon - ISO threaded 30 mm by 1.5 mm pitch | |
| Relative Humidity: | 90% RH | |
| LED Indicators: | Blue - Target Sensed, Green - Set Speed | |
| Connections: | 2 wire (M3003V10AI) or 5 wire (M3007V10AI), 3m long cable. | |
| Protection: | IP66 |
Tell us your quantity and requirements — we reply within one business day.
Speed Switches & EncodersThe Whirligig® is a fully guarded target for easy mounting of motion sensors. It is a universal shaft sensor mount suitable for all industry standard cylindrical or DIN style inductive sensors including…
Speed Switches & EncodersThe 4B heavy duty aluminium Rotech rotary shaft encoder is used primarily for protecting equipment and personnel from dangerous underspeed/belt slip conditions in extreme environments. Other applications include accurate speed control, direction…
Speed Switches AccessoriesThe Speed Relay is used to monitor the speed of a rotating shaft and detect if it rises or falls below a preset safety level. The DIN rail mounted speed relay can…
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.