Wolf Micro & Mini Torch (Zones 0, 1, 2, 20, 21 & 22 Hazardous Areas)

Product Overview

Hazardous Area Torches

Wolf M-10 | Wolf M-20 | Wolf M-40 | Wolf M-60

Torches for Zone 0, 1, 2, Zone 20, 21, 22 Hazardous Area Lighting

The Wolf Micro & Mini torches have an ergonomic design and are constructed from high quality thermoplastic resin, with excellent impact and chemical resistance and the polycarbonate lens is set-back within the lens ring to minimise risk of damage.

All models of the Wolf Micro & Mini torches have a lanyard hole (M-10 Micro supplied with neck cord), an integral pocket clip for secure retention and to prevent roll on a flat surface, and a push-button for single-handed switching, which is shrouded to guard against accidental operation. All models are certified IP67, sealed against water/dust ingress.

The M-10 Micro, M-40 and M-60 Mini torches use an LED light source and are approved for Category 1 equipment for use in Zones 0, 1 and 2 and the M-20 Mini torch uses a Xenon filament bulb and is approved as Category 2 equipment for use in Zones 1 and 2.

ATEX Torches For Hazardous Areas

Wolf Micro & Mini torches provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the torches utilise LED and Xenon technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIIA & IIIB Groups) with T4/T5 temperature classification. Zone 0 and 20 version torches are available.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf Micro & Mini Torches range to provide portable lighting in explosive atmospheres:

• Wolf M-10 Spot Beam Torch Zone 0
• Wolf M-20 Spot Beam Torch Zone 1
• Wolf M-40 Spot Beam Torch Zone 0
• Wolf M-60 Spot Beam Torch Zone 0
• ATEX Certification: II 1 GD Ex ia IIC T5 (Ta=50ºC) tD A20 IP67 T80ºC (M-10)
• ATEX Certification: II 2 GD Ex ib IIC T4 (Ta=50ºC) tD A21 IP67 T80ºC (M-20)
• ATEX Certification: II 1 GD IIC T4 (-40ºC ≤ Ta ≤ +50ºC), Ex ia IIIB T125ºC Da IP67 (M-40 & M-60)
• Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC (Wolf M-20)
• Hazardous Area Zone 0, 1 & 2 Gas Groups IIIA, IIIB & IIIC (Wolf M-10, M-40 & M-60)
• Temperature Classification (Gas) T5 (M-10) T4 (M-20, M-40 & M-60) | See more information about T Class Ratings
• Maximum Surface Temperature (Dust) 95°C (M-10), 125ºC (M-40), 130ºC (M-60)
• More Technical Information Hazardous Area Zones

Wolf Micro & Mini Torch

• ATEX and IECEx Certified torches
• Gas: Hazardous Area Zone 1 & Zone 2
• Dust: Hazardous Area Zone 21 & Zone 22
• T4/T5 temperature class
• Ultra small size torch
• Lightweight, ergonomic design
• Proven impact resistance
• Single handed switching
• Switch protection shroud
• Integral pen style pocket clip
• IP67 water and dust tight
• Gas and Dust Approval
• Hazardous Area Group I Mining Approval

Zones 0, 1, 2, 20, 21 & 22 Hazardous Areas

• Zone 0, Zone 1 & Zone 2 Gas
• Zone 20, Zone 21 & Zone 22 Dust
• See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf Micro & Mini range are torches manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 0, Zone 21 or Zone 20 hazardous areas – the LED / Xenon torches are for use in potentially explosive atmospheres according to the ATEX Directive.

Light Output & Product Dimensions

Wolf M-10
Spot Beam (approx. 13°)
Peak luminous intensity at 2.5m 8 lux

Wolf M-20
Spot Beam (approx. 6°)
Peak luminous intensity at 2.5m 100 lux

Wolf M-40
Spot Beam (approx. 18°)
Peak luminous intensity at 2.5m 15 lux

Wolf M-60
Spot Beam (approx. 8°)
Peak luminous intensity at 2.5m 275 lux