Wolf ATEX Worklite Floodlights – Zone 1, 2, 21 & 22 Hazardous Area Floodlight

Product Overview

Hazardous Area Floodlights

Wolf WL70 | Wolf WL-80 | Wolf WL-85

Floodlights for Zone 1, Zone 21, Zone 2, Zone 22 Hazardous Area Lighting

Wolf ATEX Worklite are available in a stainless steel construction and is specifically designed for use in corrosive and arduous environments in industrial and offshore applications plus the battery and control circuit are within a box enclosure giving IP65 protection from ingress of dust and water jets.

The floodlight lamp has an anodised aluminium pivotable head that is IP65 sealed and designed as a heatsink for the LED light source, plus has an impact resistant 6mm toughened glass lens. In shot blasting and painting applications, the lens can be protected using a disposable antistatic lens guard (3 supplied).

Following the 2018 update, the Worklite™ now has:

• 3X The Light Output – up to 3,100 lumens at source
• 2X The Light Duration – up to 40 hours
• 4X The LED Life – designed to give 100,000+ hours
• IECEx Certification

ATEX Floodlights For Hazardous Areas

Wolf ATEX Worklite provides reliable and versatile hazardous area lighting according to ATEX Directive standards – the floodlights utilise LED technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres with T4 temperature classification.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf ATEX Worklite floodlight range to provide temporary lighting in explosive atmospheres:

• Wolf WL-70 ATEX Worklite Floodlight Zone 1
• Wolf WL-80 ATEX Worklite Floodlight Zone 1
• Wolf WL-85 ATEX Worklite Floodlight Zone 1
• ATEX Certification: II 2 GD II T4 (Tamb = 55°C) T135°C
• Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC
• Temperature Classification (Gas) T4 | See more information about T Class Ratings
• Maximum Surface Temperature (Dust) 135ºC
• More Technical Information Hazardous Area Zones

Wolf ATEX Worklite floodlights

• ATEX approved floodlights for Zone 1 explosive gas and dust atmospheres
• High power white LED beam with flood of lower level fringe light
• LED light source ‘fitted for life’, no bulb replacement required
• Long duration, up to 12 hours full power, 24 hours half power
• Robust durable stainless steel construction
• Locking pivot head to direct light
• Toughened glass lens with optional disposable lens guard
• Rechargeable high capacity battery, fully managed
• State of charge LED indication
• Floodlight supplied with a mains charger with state of charge indication, powered from 100 to 254Vac

Zones 1, 2, 21 & 22 Hazardous Areas

• Zone 1 & Zone 2 Gas
• Zone 21 & Zone 22 Dust
• See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf ATEX Worklite range are floodlights manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 2, Zone 21 or Zone 22 hazardous areas – the LED floodlights are for use in potentially explosive atmospheres according to the ATEX Directive.

Light Output & Product Dimensions

Wolf WL-70
18W LED Beam (approx 30°)
Peak luminous intensity at 5m 120lux

Wolf WL-85 & Wolf WL-80
36W LED Beam (approx 30°)
Peak luminous intensity at 5m 210lux