ATEX Doors | Dynaco S-535 High Speed Door – Interior

Product Overview

Zone 2 & Zone 22 Hazardous Areas

High Speed Roll-up Door Certified & Approved According to ATEX – DYNACO S-535

Dynaco S-535 high speed roll-up ATEX doors are suitable for use in indoor hazardous area applications in Zone 2 (Gas) and Zone 22 (Dust) potentially explosive atmospheres – the high performance doors are approved by the Apragaz notified body.

All metal parts of the Dynaco S-535 hazardous area doors are made from corrosion resistant stainless steel whilst the non-metallic parts are composed of antistatic or electrical conductive materials – the construction of the doors ensures they avoid the build up of static electricity that could led to a spark in flammable gas/dust environments, collectively referred to as hazardous area zones, according to the level of explosion risk defined by the ATEX Directive.

💡 STOP & CHECK – Are you compliant? Is your current high speed door an accident waiting to happen? There are many high speed doors installed which have been accepted as compliant because they have an ATEX certified motor. This does not even begin to mitigate the spark potential from such a piece of equipment. If you are concerned, please do not hesitate to contact our team for advice.

Tutorial | Specifying Compliant ATEX Doors for Hazardous Areas & Explosive Atmospheres

Ask us to calculate your temperature losses and confirm the expected annual energy savings by installing high speed doors.

Benefits of Dynaco Doors

Explosive Atmospheres & Hazardous Area Locations & Workspaces

• Save Energy – reduced heat losses to buildings achived by superior sealing against air escape, draughts, humidity and loss of heat
• Fastest Door Cycle – Dynaco high speed doors limit heat loss and energy costs. 80% of energy losses are due to open time of the door
• Accident Forgiving & Self Reinserting – reduce costly repairs, avoid downtime interruptions due to blocked doors + damage to vehicles
• Reliability – few moving parts, reduced maintenance, lower operating costs and long service lifetime. >1million cycles = market leader
• Ultra Safe – the only 3^rd party ATEX certified high speed flexible door available – soft bottom with edge detection reduces accidents
• Explosion Proof & Non-Sparking – high strength, corrosion-resistant stainless steel door structure + anti-static synthetic parts
• Plant & Personnel Safety – flexible door curtain with no rigid elements improves Health & Safety with reduced site injuries + damages
• See also: ATEX Door Locks | Magnetic Locks for Security Control In Hazardous Areas

As well as being certified according to ATEX Directive for Zone 2 & Zone 22 hazardous area locations the Dynaco S-535 range of doors also conform yo EN13241-1. Efficient operating speed and superior sealing properties enable this ATEX door to improve traffic flows, provide employee comfort and save money on energy costs.

Dynaco S-535 doors are fully self-reinserting and therefore will automatically reinsert itself if the the curtain is accidentally hit.

Apragaz are an official inspection authority for equipment used in potentially explosive atmospheres.

Their unique design provides virtually perfect sealing, making the doors airtight and protecting your environment against drafts, humidity and dirt.

Self Reinserting

The curtain automatically reinserts itself when dis-lodged. No repair costs, no production downtime.

Specifications

• Conforms To EN13241-1 – BS EN 13241-1 Product Standard for Powered Doors & Gates
• Conforms To ATEX Directive 2014/34/EU – Equipment for Potentially Explosive Atmospheres

💡 Handling Drums In Hazardous Areas? ➡

Dynaco S-535

Technical Specification

Zone 22 Explosive Dust atmospheres

Zone 22 is defined as a “hazardous atmosphere formed by a dust cloud that is not likely to occur in normal operation and if so, only for a short period of time. Accumulations and layers of combustible dusts are present.” As part of explosion protection measures for, it is critical that prevention and mitigation against risk form the basis of a safe working environment. Preventing an explosive dust cloud from occurring is the primary method but this cannot always be achieved. The next step is to remove ignition sources such as electrical and non-electrical devices, hot surfaces and electrostatic discharges. Further mitigation measures may include partial inerting, isolating (making sections), venting and good housekeeping. Equipment used within such areas should be certified in line with the ATEX directive.

Potentially explosive atmospheres in the food industry include flour mills and the logistics and storage warehouses for custard powder, instant coffee, sugar, dried milk, potato powder and soup powder – including Zones 1 (21) and Zones 2 (22) we can assist with the upgrade of traditional fluorescent to modern technology brilliant white-light LED hazardous area lighting systems.

EN13241-1 Standards

** Valid for a door of 3500 x 3500mm

ATEX Directive 2014/34/EU

II 3 G/D
Ex h IIC T6 EPL Gb
Ex h IIIC 85°C EPL Db
Ex db mc ia e IIC T4 EPL Gc
Ex tb mc tD IIIB 135°C EPL Dc
CE 0029 APRAGAZ 16ATEX 0150X/1
T ambient -10°C to 45°C

Dynaco S-535 Dimensions & Installation Requirements

All indicated dimensions are net: the space necessary for mounting and maintenance has to be provided. Reduced dimensions: upon request.

Please Note: Based on the risk analysis of the environment, extra push buttons, detectors and covers might be required.

ATEX Doors Product Overview

The Dynaco range of High Speed Roll-up Doors include options for interior and exterior applications for use in explosive gas and dust atmospheres. An overview and certification details can be found below. Refer to individual door product pages for full specification details.

Experts in Equipment for Explosive Atmospheres

EMBED FLIPBOOK