Single Gas & Multi-gas Detectors | Fixed Point Gas Detection & Portable Gas Safety Applications | Industrial Locations & Hazardous Area Zones
Single Gas & Multi-gas Detectors | Fixed Point Gas Detection & Portable Gas Safety Applications | Industrial Locations & Hazardous Area Zones
Crowcon Xsafe | Gas Detection for Non-Hazardous Areas
The Crowcon Xsafe fixed gas detector is a robust flammable gas detector suitable for use in non-hazardous areas.
Part of the Xgard family of gas detection equipment, the Xsafe gas detector has a tough alloy housing, offers a standard design and reliability without the extra cost of certified electronics.
Crowcon Xsafe gas detector is a non-certified low cost catalytic bead type detector which has 3-wire 4-20mA or mV bridge output.
The diagram below illustrates how to determine which gas detector best suits the requirements of the end user.
*3/4 ” cable entry only available on aluminium junction boxes.
Visit hazardous area gas detectors for explosion and flameproof gas monitoring and detection instruments with certification for potentially explosive atmospheres, including Zone 1 and Zone 2 (according to ATEX and IECEx) and Class/Division categories (according to North American standards).
| Category | Gas Detection |
|---|
| Size | 156 x 166 x 111mm (6.1 x 6.5 x 4.3 inches) |
| Weight | 1kg (2.2lbs) |
| Enclosure material | Aluminium |
| Ingress protection | IP65 |
| Cable entries | 1 x M20, 1/2 “NPT or 3/4 NPT* on right-side |
| Terminations | 0.5 to 2.5mm2 |
| Sensor type | Catalytic bead |
| Operating temperature | mV: -40 to +80°C (-40 to 176°F) mA: -40 to +55°C (-40 to 131°F) |
| Storage | -25°C to +65°C (-13°F to +149°F) |
| Humidity | 10 to 95% RH |
| Repeatability Zero drift | <2% FSD (Typical) <2% FSD per Month (Typical) |
| Response time | T90 <15s (Typical) |
| Operating voltage | mA: 10-30V dc mV: 2.0V dc |
| Power requirements | mA: 50mA at 24V dc 1.2W mV: 300mA (Typical) |
| Electrical output | mA: 3- wire 4-20mA (current sink or source) mV: 3- wire mV bridge Typical signal: 12-15mV/ %LEL CH4 |
| Approvals | Not certified for use in hazardous environments |
| EMC compliance | EN 50270 FCC Part 15 ICES- 003 |
Tell us your quantity and requirements — we reply within one business day.
Fixed Gas Detectors | Flammable, Toxic & Oxygen Gas MonitorsThe Duct SafEye Open Path gas detector, from Crowcon, was specially designed and is widely used to monitor and alarm against ingress of hazardous gas concentrations into air intakes of turbine engines…
Fixed Gas Detectors | Flammable, Toxic & Oxygen Gas MonitorsOpen Path Gas Detection System | Continuous Monitoring for Combustible Hydrocarbon Gases
Fixed Gas Detectors | Flammable, Toxic & Oxygen Gas MonitorsOpen Path Gas Detection System | Continuous Monitoring for Combustible Hydrocarbon Gases
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.