Junction Boxes & Enclosures Exd Flameproof Explosion Protection
Junction Boxes & Enclosures Exd Flameproof Explosion Protection
Explosion Protection Group IIC Hazardous Areas
Technor GUB/EMH Aluminium Enclosure is an Ex d enclosurewhichoffers Ex-d IIC mode of protection – the flameproof enclosures are suitable for use in hazardous areas of industrial plants for indoor and outdoor applications.
Technor GUB/EMH enclosures are classified to international hazardous area classifications with ATEX, IECex and TRCU certification, with ingress protection IP66 and an operational ambient temperature range of -60°C to +60°C.
The Technor GUB/EMH enclosure can be equipped with following components:
Ex d enclosures are used for the following typical applications: push button stations, instrument housing, lighting distribution panels, power distribution panels, motor protection and panels for trace heating systems.
The following table enables the correct specification and selection of Exd Flameproof Enclosures manufactured from aluminium from the Technor GUB/EMH range:
II 2 GD
II 2(1) GD
II 2(2) GD
under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only
Contact our team for an extensive range of hazardous area products for Electrical & Process Instrumentation applications: this includes flow meters, level sensors, solenoid valves, heat tracing cables and electrical heaters.
| Category | ATEX Enclosures & Junction Boxes |
|---|
| Material | Aluminium with low content of copper Stainless Steel AISI 316 L (upon request) The sides A, B & C can be increased or decreased by 10% |
| IP Rating | IP66 |
| Ambient Temperature Range | -50°C to +55°C (ATEX) -60ºC to +60ºC (IECEx) |
| Approvals | Certified 00ATEX0033X TR CU IECEx INE 15.0003 |
| Surface Treatment | Green colour polyurethane painting cycle RAL6003 (other colour available upon request) |
| Entries | Metric pitch 1.5, ANSI B1.20.1 NPT, UNI-6125 |
| Hardware & Screws | AISI316 Stainless steel external screws |
| Standard Certificate Label | Made by self adhesive UV and corrosion resistant polyester, approved by INERIS Laboratory. |
| Accessories Available Upon Request | Drain/breather valve Internal anticondensate painting Traffolyte/Stainless steel certificate label Stainless steel construction |
| Technor Part Number | Dimensions | Window Diameter | Weight (kg) | ||||||
| A | B | C | D | E | F | H | |||
| EMH-160 + PS | 210 | 210 | 160 | 180 | 180 | 78 | 115 | 155 | 6.00 |
| EMH-175 + PS | 232 | 281 | 185 | 202 | 251 | 97 | 141 | 170 | 8.90 |
| EMH-200 + PS | 257 | 298 | 200 | 227 | 268 | 106 | 150 | 195 | 11.90 |
| EMH-230 + PS | 295 | 330 | 236 | 259 | 295 | 140 | 189 | 230 | 15.80 |
Tell us your quantity and requirements — we reply within one business day.
ATEX Enclosures & Junction BoxesThe BPGA is a pre-built, fully certified, and ready-to-install junction box, ideal for lighting, small power, and routine maintenance applications. These ATEX Enclosures provide a reliable solution for hazardous areas, saving installation…
ATEX Enclosures & Junction BoxesExplore our range of Electrical Enclosures & Junction Boxes designed for Zone 1 Enclosures and Zone 2 Enclosures in hazardous areas. These Hazardous Area Enclosures from ABTECH are fully ATEX certified, providing…
ATEX Enclosures & Junction BoxesApplication for Hazardous Areas
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
