Lighting for Zone 1, Zone 21, Zone 2, Zone 22 Hazardous Area Lighting Applications
Lighting for Zone 1, Zone 21, Zone 2, Zone 22 Hazardous Area Lighting Applications
Technor’s LED RMS 560 is an LED Ex eb lighting fixture suitable for hazardous area lighting and offersoffers Ex-e IIC mode of protection and has a body and glass frame are made of stainless steel AISI304 and manufactured from a single sheet of steel with no invasive mounting holes, to minimise the risk of water ingress through the housing.
Designed to allow the operator to work with free hands and alone during start-up or maintenance without needing to support any of the Ex eb lighting fixture.
Technor EMS 560 Ex eb LED lighting fixtures are 95% recyclable only components and insulation of single core wires need some more care.
Technor LED RMS 560 lighting is classified to international hazardous area classifications with ATEX certification, with ingress protection IP65 and an operational ambient temperature range of -20°C to +60°C.
* With micro-switch
* External battery unit protected by stainless steel cover
**180′ emergency version with external battery unit available upon request
II 2 GD
under IEC Ex directive, junction boxes and enclosures are suitable for IIC group of gases/dusts only
Approvals
TÜV CY 17 ATEX 0205847 X
| Category | ATEX Lighting (Zone 1 & Zone 2) |
|---|
| Material | AISI304 stainless steel, 0,8mm thickness and transparent part in tempered glass (AISI 316 L version available upon request) |
| IP rating | IP65 |
| Ambient temperature range | -20°C to +60°C |
| Approvals | TÜV CY 17 ATEX 0205847 X |
| Gaskets | Special cross-section tightness gasket, silicon rubber made (closed cell), located in housing channel between body and window frame. |
| Entries | Body complete of two 21mm Ø through holes (on one side) for cable entry, one complete of metallic plug with M20 locknut and gasket and the other one with temporary plastic plug to prevent dust ingress. |
| Hardware and screws | AISI304 Stainless steel external hardware and screws |
| Lamps | Extended long life new LED technology with CRI > 85 |
| Ballast | Electronic |
| Rated Operation Voltage (UE) | 220-240Vac (normal and emergency service) 198-278Vdc (normal service) |
| Frequency | 50 – 60 Hz |
| Power Factor | >0.95 |
| Accessories available upon request | Pole mounting kit / Ceiling mounting kit / Suspension mounting kit / Wall mounting kit 3°- 4° through holes opposite side |
| Technor Part Number | Code | Power (W) | Dimensions (mm) | Weight (kg) | ||
| A | B | C | ||||
| RMS-560 116 | A020321160600 | 16 | 737 | 239 | 123 | – |
| RMS-560 216 | A020322160600 | 2X16 | 737 | 239 | 123 | – |
| RMS-560 132 | A020321320600 | 32 | 1347 | 239 | 123 | – |
| RMS-560 232 | A020322320600 | 2X32 | 1347 | 239 | 123 | – |
| RMS-560 116/MS* | A020321160601 | 16 | 737 | 239 | 123 | – |
| RMS-560 216/MS* | A020322160601 | 2X16 | 737 | 239 | 123 | – |
| RMS-560 132/MS* | A020321320601 | 32 | 1347 | 239 | 123 | – |
| RMS-560 232/MS* | A020322320601 | 2X32 | 1347 | 239 | 123 | – |
| Technor Part Number | Code | Power (W) | Dimensions (mm) | Weight (kg) | ||
| A | B | C | ||||
| RMS-560 116 LE-P-90 | A020421161610* | 16 | 737 | 239 | 183 | – |
| RMS-560 216 LE-P-90 | A020422161610* | 2X16 | 737 | 239 | 183 | – |
| RMS-560 132 LE-P-90 | A020421321610** | 32 | 1347 | 239 | 123 | – |
| RMS-560 232 LE-P-90 | A020422321610* | 2X32 | 1347 | 239 | 123 | – |
| RMS-560 116 LE-NP-90 | A020421162610* | 16 | 737 | 239 | 123 | – |
| RMS-560 132 LE-NP-90 | A020421322610** | 32 | 737 | 239 | 123 | – |
Tell us your quantity and requirements — we reply within one business day.
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
ATEX Lights | Hazardous Area Lighting | Zone 1 & Zone 2 ATEX LightingFloodlights for Zone 1, Zone 21, Zone 2, Zone 22
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
