Request a Quote
Fisher easy-e EZ Universal Globe Valve – Sliding Stem Valves
Hazardous Area & Process Heating · Mechanical

Fisher easy-e EZ Universal Globe Valve – Sliding Stem Valves

Fisher easy-e EZ Universal Globe Valve is part of the sliding stem valve rangethat is used for throttling or on-off control of a wide variety of liquids and gases.

CategoryMechanical
Request a Quote
Request Datasheet
  • Quoted to your quantity
  • Documentation on request
  • International delivery

Product Overview

Fisher easy-e EZ Universal Globe Valve is part of the sliding stem valve rangethat is used for throttling or on-off control of a wide variety of liquids and gases.

The easy-e Ez valves are single port offering quick change trim and a post-guided, unbalanced valve plug.

Fisher easy-e EZ is available for use in chemical or hydrocarbon processing applications or wherever control of non-lubricating, viscous, or other hard-to-handle fluids is required.

Product Features

  • Compliance with the Clean Air Act—ENVIRO-SEAL™ packing systems provide an improved stem seal to help prevent the loss of process fluid. The ENVIRO-SEAL packing systems feature PTFE, Graphite ULF, or Duplex packing with live loading for reduced packing maintenance
  • Valve Plug Stability— Post guiding provides valve plug stability with a lower chance of a sticking valve plug due to non-lubricating or sticky process fluids or build-up of entrained solids. Post guiding stabilizes the valve plug at all points in its travel range to reduce vibration, mechanical noise, and trim wear
  • Application Flexibility—Low-flow requirements can be met with standard restricted-capacity trim or with Micro-Form, Micro-Flute, or Micro-Flow valve plugs. If flow requirements change, the valve can be converted to full-sized trim
  • Performance+ Seat Ring—Flow-straightening, vaned seat rings are available in full port and first reduction port sizes. It offers excellent open- and closed-loop performance and may be used as a direct replacement for the non-vaned seat ring. It is recommended that the Performance+ seat ring be used for non-viscous, flow-up, liquid applications
  • More Flow Capacity for Initial Investment— Streamlined flow passages provide excellent capacities and flow
  • Compliance with European Standards— Valves are available with dimensions specified by EN/DIN standards
  • Sour Service Capability—Materials are available to meet NACE standards
  • Operating Economy— Increased wear resistance provided by standard, hardened stainless steel trim means long service life
  • Maintenance Economy— Trim inventory costs are cut because dimensional standardization permits use of most standard easy-e trim parts. During removal of trim parts, the valve body can stay in the pipeline

PRODUCT Specification

1. EN (or other) ratings and end connections can usually be supplied; please contact 2. Do not exceed the pressure/temperature limits in this bulletin. Any applicable standard or code limitations should not be exceeded. 3. Certain bonnet bolting material selections may require a CL600 easy-e valve assembly to be derated please contact

See how Fisher Control Valves provide safe, efficient and intuitive flow control.

Technical Specifications

CategoryMechanical
Valve SizesNPS 1/2, 3/4, 1, 1-1/2, 2, 3, and 4
End Connection Styles(1)(2)Cast Iron Valves Flanged: NPS 1 through 4, CL125 flat-face or CL250 raised-face flanges per ASME B16.1 Steel and Stainless Steel Valves Flanged: CL150, CL300, or CL600 raised-face (RF) or ring-type joint (RTJ) flanges per ASME B16.5, Raised-face (RF) flanges per EN1092-1/B Screwed or Socket Welding: NPS 1/2 through 2, consistent with ASME B16.11 Buttwelding (schedule 40 or 80): NPS 1 through 4, consistent with ASME B16.25
Maximum Inlet Pressure and Temperature(1)(2)Cast Iron Valves Flanged: Consistent with CL125B or CL250B pressure-temperature ratings per ASME B16.1 Steel and Stainless Steel Valves Flanged: Consistent with CL150, CL300, and CL600(3) per ASME B16.34 Screwed or Welding: Consistent with CL600(3) per ASME B16.34
Shutoff Classifications Per ANSI/FCI 70-2 and IEC 60534-4Metal Seating: Class IV is standard. Class V is optional PTFE Composition Seating: Class VI
Construction MaterialsBody and Bonnet: Cast iron, WCC steel, CF8M (316 stainless steel), WC9 chrome moly steel, or other materials upon request
Flow CharacteristicsEqual percentage, quick opening, and linear. With soft seat, equal percentage is standard
Flow DirectionUp through the seat ring
OptionsLubricator or lubricator/isolating valve for packing lubrication and valve body drain plug

Request Information About This Product

Tell us your quantity and requirements — we reply within one business day.

Related Products

Have a product requirement?

Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.

Request a Quote
Talk to Our Team