Wolf WF-300XL LinkEx LED Floodlite ATEX – Zone 1, 2, 21 & 22 Hazardous Area Floodlight

Product Overview

Hazardous Area LED Floodlights

Wolf WF-300XL

Floodlights for Zone 1,2 Zone 21, 22 Hazardous Area Lighting

WF-300XL floodlites are high powered, robust, lightweight and portable, producing 6,378 lumens with a low power consumption of only 55W (LV) or 62W (HV).

Two LED panels with 18 lights provide a 33º beam angle with more than 100,000 hours of life assured by efficient heat dissipation through built-in fins and electronic thermal control.

Wolf WF-300XL LinkEx LED Floodlites are supplied with 10 metres of SY cable and fitted with an ATEX plug and runs with voltages of 90 to 264V AC/DC or 18 to 50V AC/DC.

For mains voltages it can also be fitted with an ATEX socket to setup a string of lights from a single power source.

The LinkEx LED Floodlite is constructed with a robust marine grade aluminium enclosure with corrosion resisting coating is ideal for harsh environments.

The lens is a toughened, scratch, impact and chemical resistant glass, which can be protected using a disposable anti-static lens film and is sealed dust tight and protected from water immersion with a certified IP66/67 enclosure.

Supplied with a stainless steel (316 grade) bridle for pivot angle adjustment and bolted to a stainless steel stand for protection. The floodlite is fitted to a stainless steel bridle and stand which can be pivoted and can easily be detached and bolted to magnet fixings or a tripod stand.

ATEX Floodlight For Hazardous Areas

Wolf WF-300XL floodlight provides reliable and versatile hazardous area lighting according to both ATEX Directive and IECEx standards – the floodlight utilise LED technology as a light source and are used for safe lighting in hazardous area Zones 1 and Zones 2 (potentially explosive gas) and Zones 21 and Zones 22 dust atmospheres (IIIA, IIIB & IIIC Groups) with T4 temperature classification.

ATEX & IECEx Certified For Explosive Atmospheres

An overview of the Wolf ATEX WF-300XL floodlight range to provide temporary lighting in explosive atmospheres:

• Wolf WF-300XL Spot Beam Floodlight Zone 1
• ATEX Certification: II 2 G D Ex eb mb op is IIC T4 Gb Ex tb op is IIIC T118°C Db T = -40°C to +55°C
• Hazardous Area Zone 1 & 2 Gas Groups IIA, IIB & IIC
• Temperature Classification (Gas) T4 | See more information about T Class Ratings
• Maximum Surface Temperature (Dust) T118ºC
• More Technical Information Hazardous Area Zones

Wolf WF-300XL Linkex LED Floodlite ATEX

• ATEX Directive compliant floodlite and IECEx Scheme certified including OPIS optical intrinsic safety
• For use in Zones 1 gas and 21 dust atmospheres
• High reliability LED’s – designed and tested to give 100,000+ hours life
• Thermal management – LED life assured by efficient heat dissipation through built in fins and electronic control
• Dual Independent LED System – LEs powered by independent drivers giving failsafe product reliability
• Safe Optimal Voltage Indicator System (SOVI) – Alerts user if the lights are running outside of certified and optimal voltage ranges
• Safe down to 0 volts
• LinkEx Capable – HV units can be fitted with linkable sockets enabling multiple lights to be connected in series from a single power source
• Ultra bright high power LED light output
• Medium angle 33 degree flood beam
• Wide voltage range 18-50V and 90-264V
• Small, lightweight floodlamp construction
• IP66/67 dust and watertight
• Supplied with stainless steel stand and integral bridle
• Very low maintenance
• Magnet mounting and tripod options available
• Lens protecting films available for blasting and painting applications

Zones 1, 2, 21 & 22 Hazardous Areas

• Zone 1 & Zone 2 Gas
• Zone 21 & Zone 22 Dust
• See below table for ATEX Certification details including T-Rating, Gas Groups and Zone locations

The Wolf WF-300XL range are floodlight manufactured by Wolf Safety Lamp to provide lighting in Zone 1, Zone 2, Zone 21 or Zone 22 hazardous areas – the LED floodlight are for use in potentially explosive atmospheres according to the ATEX Directive.

Light Output & Product Dimensions

Medium Flood (33.5°) (as per Light Output Diagram)

Light intensity at 2m 3573 lux, 5m 572 lux

LV output at LED source – 8,447 Lumens

LV output emitted from Floodlite – 6,129

HV output at LED source – 8,668

HV output emitted from Floodlite – 6,378