Zone 2 Fluorescent Light Fitting
Zone 2 Fluorescent Light Fitting
ATEX Classification – II3GD Ex nA nC IIC T4
Petrel EXEN is a fluorescent luminaire suitable for Zone 2 hazardous area lighting for use in both internal and external hazardous area applications.
Zone 2 fluorescent is designed with a moulded GRP body and polycarbonate diffuser that does not require routine testing during annual maintenance inspections of hazardous area lighting systems.
Designed cleanly so that lamp changes are achieved simply by releasing the stainless steel diffuser clips and removing the diffuser. Lamp sizes from 18W to 58W – both single and twin Zone 2 fluorescent versions are available. Three hour emergency versions are fitted with integral batteries and charging unit.
where S = single lamp fitting and T = twin light fitting.
Zone 2 fluorescent hazardous area light fittings are available as twin lamps in 18 watts, 36 watts and 58 watts –contact our team to discuss your hazardous area lighting requirements, we can provide lighting design layouts from the very simple to the extremely complex.
| Category | ATEX Lighting (Zone 1 & Zone 2) |
|---|
| Fluorescent Lighting Sizes | Part Number Standard & Emergency | Lighting Fitting Length | Lighting Fitting Width | Hazardous Area Certification |
| 1 (Single) x 36 Watts | XN136/HF / XN136/HF/EM | 1312mm | 102mm | Zone 2 Ex nC |
| 1 (Single) x 58 Watts | XN158/HF / XN158/HF/EM | 1612mm | 102mm | Zone 2 Ex nC |
| 2 (Twin) x 18 Watts | XN218/HF / XN218/HF/EM | 702mm | 172mm | Zone 2 Ex nC |
| 2 (Twin) x 36 Watts | XN236/HF / XN236/HF/EM | 1312mm | 172mm | Zone 2 Ex nC |
| 2 (Twin) x 58 Watts | XN258/HF / XN258/HF/EM | 1612mm | 172mm | Zone 2 Ex nC |
| Supply Voltage | 230v 50/60Hz standard. Suitable for central battery operation. | |
| Operating Temperature Requirements | -20ºC to +51ºC standard supply subject to ambient temperature | |
| Control Gear | Electronic instant start ballast and integral charger inverter for emergency fluorescent versions. EOL cut off. 3hr operation with internal battery subject to ambient temperature. | |
| Fluorescent Light Lamp Options | Twin 18w, 36w, 58w T8 (Lamps not provided) Single 36w and 58w T8 (Lamps not provided | |
| Certificate | PET 14 ATEX TFXNX | |
| Cable Entries | 1 x M20 clearance holes at each end (1 plugged as Standard) | |
| Terminals | 3 wire and earth. Cable size 4mm2 max Through wiring option available | |
| Light Mounting Facility | “Snap on” stainless steel brackets | |
| Access | Quick release stainless steel clips to free diffuser and spring clips release gear tray | |
| Light Fitting Material | GRP moulded body, polycarbonate diffuser and coated steel control gear tray. Stainless steel diffuser and tray retaining clips | |
| Finish | Standard colour – Light grey non coated moulding | |
| Weight | Standard Fluorescent | 2 x 18 Watts 2.8grams |
| 2 x 36 Watts 3.6grams | ||
| 2 x 58 Watts 5.0kilograms | ||
| 1 x 36 Watts 3.2kilograms | ||
| 1 x 58 Watts 3.4kilograms | ||
| Emergency Fluorescent | 2 x 18 Watts 3.8grams | |
| 2 x 36 Watts 4.6grams | ||
| 2 x 58 Watts 5.6kilograms | ||
| 1 x 36 Watts 4.0kilograms | ||
| 1 x 58 Watts 4.2kilograms | ||
Tell us your quantity and requirements — we reply within one business day.
ATEX Lighting (Zone 1 & Zone 2)Contact our hazardous area lighting experts for design specification, technical advice, quotations, and fast delivery for both UK & export orders.
ATEX Lighting (Zone 1 & Zone 2)Below a prestigious project was won to supply lighting and distribution ATEX fully wired control panels for an upgrade of a major UK project.
ATEX Lighting (Zone 1 & Zone 2)The range of ATEX Lighting according to – the section outlines the complete range of hazardous area lighting products certified by ATEX to the Ex d Flameproof explosion protection concept.
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
