Turn-Mill CentresCNC Machine Tools
C160M-300 CNC Turning Milling Center
C160M-300 CNC Turning Milling Center: maximum turning diameter Ø320 mm, maximum turning length 265 mm, bar capacity Ø42 mm. Request a quote.
Ø320 mm · 265 mm · Ø42 mm
C200MYS-500 Twin Spindle CNC Turning Milling Center
C200MYS-500 Twin Spindle CNC Turning Milling Center – CNC turn-mill centres with powered turrets, C axis and optional Y axis or sub-spindle to complete tur…
Machining capacity370 mm maximum turning diameter, 518 mm maximum turning length, 8-inch and 6-inch chuck and 52/42 mm bar capacity
Direct-drive spindleA2-6/A2-5 spindle nose, 4500/5000 rpm maximum speed; rated/maximum torque is 95.5/170 N·m for the main spindle and 52/109 N·m for the sub-spindle
X/Y/Z1/Z2 Axis capability185+39/100/518/537 mm with rapid feed rates up to 28/8/28/18 m/min
Powered tooling12-station TCSDY80HP-12T-350-01 servo-driven power turret for turning, threading, grooving, chamfering and milling
- Quoted to your quantity
- Documentation on request
- International delivery
Product Overview
The C200MYS-500 is a CNC turn-mill centre that combines turning with milling, drilling and tapping. A powered turret and C axis let you machine flats, holes and slots without moving the part to a second machine.
C200MYS-500 at a glance
Machining capacity 370 mm maximum turning diameter, 518 mm maximum turning length, 8-inch and 6-inch chuck and 52/42 mm bar capacity, direct-drive spindle A2-6/A2-5 spindle nose, 4500/5000 rpm maximum speed; rated/maximum torque is 95.5/170 N·m for the main spindle and 52/109 N·m for the sub-spindle, X/Y/Z1/Z2 Axis capability 185+39/100/518/537 mm with rapid feed rates up to 28/8/28/18 m/min, powered tooling 12-station TCSDY80HP-12T-350-01 servo-driven power turret for turning, threading, grooving, chamfering and milling and FANUC control FANUC 0i-F series CNC control and FANUC servo motors for stable production machining.
Further key data: positioning accuracy 0.005/1,000 mm; repeatability X: ≤0.003 mm/Z1Z2: ≤0.004 mm; turret TCSDY80HP-12T-350-01 (Direct Connection); spindle drive Direct-Drive Electric Spindle. A Y axis lets the driven tools mill flats, slots and off-centre holes without a second setup. A second spindle takes over the part to machine the back side in the same cycle. The machine is equipped with FANUC 0i-TF CNC control.
Quality components
Key components come from established suppliers: FANUC (CNC control, servo motors); HAOZHI (motorized spindle); NSK (spindle bearings); THK (guideways, ball screw); AUTOGRIP (fixture, hydraulic cylinder); Schneider (electrical components); CHENGXIN (turret).
Complete parts in one setup
Driven tools in the turret work together with the C axis on the main spindle. That removes secondary operations on a machining centre, cuts handling and work-in-progress, and keeps features accurately positioned relative to each other.
Options and automation
Bar feeders, part catchers, tool setters and chip conveyors are available for automated production. Send your drawing so we can confirm turret, tooling and spindle configuration for your part.
Available options for the C200MYS-500 include high-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher and chip conveyor.
Frequently asked questions
What are the main specifications of the C200MYS-500?
Machining capacity 370 mm maximum turning diameter, 518 mm maximum turning length, 8-inch and 6-inch chuck and 52/42 mm bar capacity, direct-drive spindle A2-6/A2-5 spindle nose, 4500/5000 rpm maximum speed; rated/maximum torque is 95.5/170 N·m for the main spindle and 52/109 N·m for the sub-spindle, X/Y/Z1/Z2 Axis capability 185+39/100/518/537 mm with rapid feed rates up to 28/8/28/18 m/min, powered tooling 12-station TCSDY80HP-12T-350-01 servo-driven power turret for turning, threading, grooving, chamfering and milling and FANUC control FANUC 0i-F series CNC control and FANUC servo motors for stable production machining. The full data is in the specification table on this page.
Which CNC control does the C200MYS-500 use?
It is equipped with FANUC 0i-TF CNC control.
Which options are available for the C200MYS-500?
High-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher, chip conveyor, oil-water separator and linear encoder.
How do I get a quotation for the C200MYS-500?
Send us your part drawing, material, tolerances, batch size and delivery address through the quote form. We reply with a configuration, price and lead time for delivery to your site in Europe.
Interested in the C200MYS-500? Send your drawing and requirements and we will reply with a configuration and quotation. Request a quote. See all turn-mill centres.
Technical Specifications
| Machining capacity | 370 mm maximum turning diameter, 518 mm maximum turning length, 8-inch and 6-inch chuck and 52/42 mm bar capacity |
|---|---|
| Direct-drive spindle | A2-6/A2-5 spindle nose, 4500/5000 rpm maximum speed; rated/maximum torque is 95.5/170 N·m for the main spindle and 52/109 N·m for the sub-spindle |
| X/Y/Z1/Z2 Axis capability | 185+39/100/518/537 mm with rapid feed rates up to 28/8/28/18 m/min |
| Powered tooling | 12-station TCSDY80HP-12T-350-01 servo-driven power turret for turning, threading, grooving, chamfering and milling |
| Machine type | CNC turn-mill centre |
| CNC control | FANUC 0i-TF |
C200MYS-500 – technical specifications
| Specification | C200MYS-500 |
|---|---|
| Machining Capacity | |
| Maximum Swing Diameter Over Saddle | Ø560 mm |
| Maximum Turning Diameter | Ø370 mm |
| Standard Turning Diameter | Ø200 mm |
| Swing Diameter Over Cross Slide | Ø500 mm |
| Maximum Turning Length | 518 mm |
| Chuck Size | 8″ (210 mm)& 6″ (170 mm) |
| Bar Capacity Diameter | Ø52 mm&Ø42 mm |
| Spindle | |
| Spindle Nose Type | A2-6&A2-5 |
| Spindle Bearing Model | Front NN3020+100 RearN1017&Front7016Rear7014 |
| Spindle Through Hole Diameter | Ø66 mm&Ø56 mm |
| Spindle Drive Method | Direct-Drive Electric Spindle |
| Spindle Transmission Ratio | 1:1 |
| Rated / Maximum Spindle Torque | 95.5/170 N·m & 52/109 N·m |
| Maximum Spindle Speed | 4500 rpm & 5000 rpm |
| X/Y/Z Axes | |
| Maximum Travel of X/Y/Z1/Z2 Axis | 185+39/100/518/537 mm |
| Rapid Feed Rate of X/Y/Z1/Z2 Axis | 28/8/28/18 m/min |
| Guideway Type of X/Y/Z1/Z2 Axis | 35/Hard Guideway/45/35 mm Linear Guide Way |
| Ball Screw Diameter/Pitch of X/Z1/Z2 Axis | Ø32/40/32 mm*Pitch10 Y-Axis 32 mm*Pitch05 |
| Positioning Accuracy of X/Z1/Z2 Axis | 0.005/1,000 mm |
| Repeatable Positioning Accuracy of X/Z1/Z2 Axis | X: ≤0.003 mm/Z1Z2: ≤0.004 mm |
| Motor Power | |
| X Axis Motor | 1.8 kW |
| Y Axis Motor | 1.8 kW |
| Z1/Z2 Axis Motor | 1.8 kW |
| Power Motor | 4.5 kW |
| Hydraulic Station | 1.5 kW |
| Spindle Motor | 15/26.8 kW & 11/23 kW |
| Water Pump | 0.8 kW |
| Air Conditioner | 0.3 kW |
| Turret | |
| Turret Model | TCSDY80HP-12T-350-01 (Direct Connection) |
| Tool Change Time (Adjacent/Opposite Tool) | 0.5/0.8 sec |
| Square Tool Holders | 25 mm |
| Round Tool Holders | Ø40 mm |
| Other Specifications | |
| Standard CNC Controller | FANUC |
| Voltage/Power Requirements | 380 V / 55 kVA |
| Hydraulic Tank Capacity | 45 L |
| Overall Dimensions (L × W × H) | Without chip conveyor: 2835×1783×2190 mm ; side conveyor: 3175×1783×2190 mm ; rear conveyor: 2835×2550×2190 mm |
Standard accessories
| Item Name | Specification | Quantity | Remarks |
|---|---|---|---|
| Foot Pedal Switch | Green × 1, Yellow × 1 | 2 | |
| Hex Key Wrench Set | 1 | ||
| Leveling Blocks | 6 | ||
| Leveling Screws | 6 | With machine | |
| Machine Operation Manual | 1 | ||
| CNC System Operation Manual | FANUC | 1 | |
| Certificate of Conformity | 1 | ||
| Packing List | 1 | ||
| Laser Calibration Report | 2 | USB disc | |
| Stainless Steel Tubing | 1 | ||
| Reduction Sleeve (Ø32) | Ø20, Ø25, Ø32 | 3 | 1 each |
| Tool Clamping Block | 6 | ||
| Chuck Wrench | 8 inch | 1 | |
| Items not installed on the machine will be placed inside the accessory box |
Key components and brands
| Item Name | Model/Specification | Brand |
|---|---|---|
| CNC System Controller | FANUC 0i-TF (3B) | FANUC (Japan) |
| Servo Drive Motor | bisc12b/3000 (X), bisc12/3000 (Z1/Z2), bisc12/3000 (Y),Ais22/6000 (driven tooling) | FANUC (Japan) |
| Motorized Spindle | Main: DGZYC-20045 Sub: DGZYC-17005 | HAOZHI |
| Spindle Bearings | FrontNN3020+100RearN1017&Front 7016Rear 7014(P4 Grade) | NSK |
| Guideways | HSR35(X/Z2),HSR45(Z)(H2 Grade) | THK |
| Ball Screw | SDA3210(X/Z2),SDA4010(Z)(C3 Grade) | THK |
| Fixture | Main: 3H-208 Sub: 3H-206 | AUTOGRIP (Taiwan) |
| Hydraulic Cylinder | Main: TK-B853 Sub: TR-A646 | AUTOGRIP (Taiwan) |
| Electrical Components | LC1N0910M5N (AC Contactor) | Schneider |
| Turret | TCSDY80HP-12T-350-01 (direct-coupled) | CHENGXIN |
| Ball Screw Bearings | 2562(X/Z2) 3062(Z)(P4 Grade) | FAG |
| Lubrication Pump | YET-V2P2 220 V | ISHAN (Taiwan) |
| Control Cabinet Cooling | EA-300-1225 | WINHEE (China) |
| Machine Bed | Meehanite cast-iron one-piece slant bed with electro-hydraulic integration | In-house |
| Hydraulic Components | Hydraulic Station Assembly | HOMN / HYKO |
| Chip Conveyor | Side-mounted chain-type automatic chip conveyor | TONGYI / JIBAO |
Specifications may change. The final configuration is confirmed in our quotation.
Applications
- Complex turned parts with milled features
- Hydraulic and pneumatic fittings
- Automotive components
- Medical and precision parts
- Bar-fed production cells
Features
- Powered turret for milling, drilling and tapping
- C-axis spindle positioning
- Slant-bed construction with linear guideways
- FANUC CNC control
- Bar-feeder ready
- Y axis for off-centre milling and drilling
- Second spindle for back-side machining
Available Options
Request Information About This Product
Tell us your quantity and requirements — we reply within one business day.
Related Products
Turn-Mill Centres
Turn-Mill CentresCNC Machine Tools
C250M-500 CNC Turning Milling Center
C250M-500 CNC Turning Milling Center: maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø72 mm. Request a quote.
Ø425 mm · 510 mm · Ø72 mm
Turn-Mill CentresCNC Machine Tools
C200M-500 CNC Turning Milling Center
C200M-500 CNC Turning Milling Center: maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø52 mm. Request a quote.
Ø425 mm · 510 mm · Ø52 mm
Have a product requirement?
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.