Supply to the Netherlands
Film, splash and hybrid cooling tower fill selected for your water quality, supplied to the Netherlands.
Fouled or collapsed fill is one of the main reasons cooling towers lose capacity. Wesourcia supplies cooling tower fill media for towers in the Netherlands: high-efficiency cross-flute film fill for clean water, offset and vertical-flute low-fouling fill for higher solids, and splash and hybrid fill for dirty water.
The Netherlands combines high-tech manufacturing and food processing with one of Europe's busiest port and logistics hubs in Rotterdam.
Browse the Fill, Drift Eliminators & Nozzles catalogue for specifications and photos.
Across the Netherlands we also work with buyers in high-tech equipment, food processing, chemicals and logistics.
Match the flute geometry to the water quality: suspended solids, oil, biological load and scaling tendency. Check the pack height, the support spacing and the operating temperature, and replace drift eliminators and nozzles at the same time to get the full benefit.
Send these details through our quote form.
Yes. We quote delivered to your site in the Netherlands; the quotation states the delivery terms, the lead time and the documents supplied.
The equipment comes from established manufacturers we work with directly. Your quotation names the manufacturer, the applicable standards and the certificates for your project.
Clean, treated water: cross-flute film fill. Moderate solids: offset or vertical flute. Very dirty water: splash or hybrid fill.
Often yes. Replacing fouled or old fill with modern film fill can restore or exceed the original capacity.
We confirm your request within one business day and tell you if any information is missing. The technical quotation follows as soon as the specification is complete.
Fill, Drift Eliminators & NozzlesCooling tower film fill: high-efficiency cross-flute for clean water, offset and vertical-flute low-fouling fill for higher solids. PVC packs, cut to size.
Fill, Drift Eliminators & NozzlesSplash fill bars and modular splash fill for cooling towers with dirty or high-solids water. Does not clog. Equivalents for Kelly Bar, TurboSplash, Opti-Bar.
Fill, Drift Eliminators & NozzlesHybrid cooling tower fill combining film and splash principles: better thermal performance than splash fill with more fouling resistance than film fill.
Fill, Drift Eliminators & NozzlesCellular drift eliminators for cooling towers: drift rates from 0.005 % down to 0.0005 % of circulating water, UV-stabilised PVC, low pressure drop.
Fill, Drift Eliminators & NozzlesBlade-type drift eliminators for crossflow and counterflow cooling towers, easy to clean and replace. Equivalents for DE080, DE097 and DE120 profiles.
Fill, Drift Eliminators & NozzlesCounterflow cooling tower spray nozzles in ABS and polypropylene: even distribution at 80–120 % water load, anti-loosening lock, service life over 15 years.
Tell us what you need and where it must be delivered in the Netherlands – we confirm within one business day and come back with a technical proposal and price.
