Thermocoax Isopad FIDR-SRX ATEX drum heater enclosures are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.
Thermocoax Isopad FIDR-SRX ATEX drum heater enclosures are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.
The FIDR-SRX ATEX drum heater is constructed from heavy gauge sheet steel with a double skin construction housing the electric heating elements which cover the entire inner surface ensuring the drum is heated consistently. These heating elements are insulated to prevent heat loss through the outer wall and the inner walls are also painted with a thermally conductive paint to give maximum heat transfer. The clam shell design and castors allow the drum heater enclosures to be wheeled up to and closed around the drum, eliminated overhead lifting.
Thermocoax Isopad FIDR-SRX drum heater enclosures are ATEX and IECEx approved for use within Zone 1 and Zone 2 hazardous area applications and are equipped with a -4ºC to +163ºC mechanical thermostat as standard.
Insulated lids are available to prevent heat loss through the top of the enclosure and drum to increase the heater efficiency. The range of Isopad FIBDR base drum heaters can be used alongside the FIDR-SRX ATEX drum heater enclosure to further improve the heater capabilities.
| Category | ATEX Electric & Process Heaters |
|---|
| Area Classification | Hazardous Area |
| Hazardous Area Zone | Gas – Zone 1 & 2 Dust – Zone 21 & 22 |
| Temperature Class | T2 |
| Ingress Protection | IP6X (IP65) |
| Electrical Protection Class | Class I |
| Ambient Temperature Range | -40ºC to +50ºC |
| Approvals | System Approval by Baseefa |
| Number of Certificate | Baseefa08ATEX0280X / IECEx BAS 08.0088X |
| Marking | Ex II 2 GD Ex de IIC T2 … T6 Ex tD A21 IP6X T240ºC … T80ºC |
| Norms | EN, IEC Standard |
| Height | 990mm including castors |
| Inner Diameter | 650mm |
| Outer Diameter | 770mm |
| Heater Type | Self Regulating Heating Cable |
| Carrier | Sheet Steel |
| Material of Thermal Insulation | Glass Fibre |
| Thickness | 50mm |
| Outer Protection | Sheet Steel |
| Paint | Matt Black Heat Resistant & Structured Blue Paint |
| Fixation & Closure Type | Quick-Snap Fastener |
| Junction Box (Type) | STAHL Series 8118 |
| Ingress Protection | IP66 |
| Maximum Ambient Temperature | -50ºC to +55ºC |
| Maximum Connecting Cross Section | 4mm² |
| Terminals | 8 |
| Glands | 4 x M25 |
| Housing Material | Polyester Glass Fibre Reinforced |
| Connection Lead Length | 2m |
| Lead Cross Section | 4mm² |
| Maximum Operating Temperature | 180ºC |
| Connection Lead Insulation Material | Silicone |
| Thermostat (Type) | RAYSTAT-EX-02 |
| Sensor Type | Capillary Type |
| Controller Range | -4ºC to +163ºC |
| Ingress Protection | IP65 |
| Maximum Ambient Temperature | -40ºC to +60ºC |
| Housing Material | Aluminium |
| Frequency | 50-60Hz |
| Maximum Operating Voltage | 277 Vac (~1ph) |
| Nominal Operating Voltage | Depending on design |
| Nominal Power | Depending on design |
| Maximum Operating Temperature | 65ºC to 120ºC (depends on heating cable type and temperature class) |
| Options | Design with other housing materials (e.g stainless steel). Additional insulated lid for reduction of heat loss. Alternative junction box type JBU-100-L-E with signal lamp for operating status (ON/OFF) |
| Part Number | For Standard Sizes (ltr) | Height | Inner Diameter (ID) (mm) | Outer Diameter (OD) (mm) | Nominal Power (W) | Nominal Voltage (Vac) | Weight (kg) |
| FIDR-SRX | 200 | 990 | 650 | 770 | 3930 | 230 | 60 |
Tell us your quantity and requirements — we reply within one business day.
Hazardous Area & Process Heating For Zone 1 & Zone 2 LocationsThermocoax Isopad FIDR-LID is an insulated lid for use with the FIDR range of ATEX drum heater enclosures.
Hazardous Area & Process Heating For Zone 1 & Zone 2 LocationsThermocoax Isopad FIBDR-SRQ ATEX base drum heaters are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.
Hazardous Area & Process Heating For Zone 1 & Zone 2 LocationsThermocoax Isopad FIBDR-SRB ATEX base drum heaters are designed to provide medium flow and process temperature to 200 litre steel drums in Zone 1 and Zone 2 hazardous areas.
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.
