Turn-Mill CentresCNC Machine Tools
C160M-300 CNC Turning Milling Center
C160M-300 CNC Turning Milling Center: maximum turning diameter Ø320 mm, maximum turning length 265 mm, bar capacity Ø42 mm. Request a quote.
Ø320 mm · 265 mm · Ø42 mm
C200MS-500 Twin Spindle CNC Turning Milling Center
C200MS-500 Twin Spindle CNC Turning Milling Center: maximum turning diameter Ø425 mm, maximum turning length 510 mm. Request a quote.
Maximum turning diameterØ425 mm
Maximum turning length510 mm
Bar capacityØ52 mm&Ø42 mm
Maximum spindle speed4500 rpm / 5000 rpm
- Quoted to your quantity
- Documentation on request
- International delivery
Product Overview
The C200MS-500 is a CNC turn-mill centre that combines turning with milling, drilling and tapping. A powered turret and C axis let you machine flats, holes and slots without moving the part to a second machine.
C200MS-500 at a glance
Maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø52 mm&Ø42 mm, maximum spindle speed 4500 rpm / 5000 rpm and axis travel 210+35/510/530 mm.
Further key data: positioning accuracy 0.008/1000 mm; repeatability X: ≤0.003 mm/Z1Z2: ≤0.004 mm; turret BMT55-12T; spindle drive Direct-drive Motorized Spindle. A second spindle takes over the part to machine the back side in the same cycle. The machine is equipped with FANUC 0i-TF CNC control.
Quality components
Key components come from established suppliers: FANUC (CNC control, servo motors); HAOZHI (motorized spindle); NSK (spindle bearings); THK (guideways, ball screw); AUTOGRIP (fixture, hydraulic cylinder); SCHNEIDER (electrical components); CHENGXIN (turret).
Complete parts in one setup
Driven tools in the turret work together with the C axis on the main spindle. That removes secondary operations on a machining centre, cuts handling and work-in-progress, and keeps features accurately positioned relative to each other.
Options and automation
Bar feeders, part catchers, tool setters and chip conveyors are available for automated production. Send your drawing so we can confirm turret, tooling and spindle configuration for your part.
Available options for the C200MS-500 include high-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher and chip conveyor.
Frequently asked questions
What are the main specifications of the C200MS-500?
Maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø52 mm&Ø42 mm, maximum spindle speed 4500 rpm / 5000 rpm and axis travel 210+35/510/530 mm. The full data is in the specification table on this page.
Which CNC control does the C200MS-500 use?
It is equipped with FANUC 0i-TF CNC control.
Which options are available for the C200MS-500?
High-speed centrifugal pump, oil mist collector, safety door lock, bar feeder, pneumatic sliding door, tool setter, part catcher, chip conveyor, oil-water separator and linear encoder.
How do I get a quotation for the C200MS-500?
Send us your part drawing, material, tolerances, batch size and delivery address through the quote form. We reply with a configuration, price and lead time for delivery to your site in Europe.
Interested in the C200MS-500? Send your drawing and requirements and we will reply with a configuration and quotation. Request a quote. See all turn-mill centres.
Technical Specifications
| Maximum turning diameter | Ø425 mm |
|---|---|
| Maximum turning length | 510 mm |
| Bar capacity | Ø52 mm&Ø42 mm |
| Maximum spindle speed | 4500 rpm / 5000 rpm |
| Machine type | CNC turn-mill centre |
| CNC control | FANUC 0i-TF |
C200MS-500 – technical specifications
| Specification | C200MS-500 |
|---|---|
| Machining Capacity | |
| Maximum Swing Diameter Over Saddle | Ø560 mm |
| Maximum Turning Diameter | Ø425 mm |
| Standard Turning Diameter | Ø200 mm |
| Swing Diameter Over Cross Slide | Ø450 mm |
| Maximum Turning Length | 510 mm |
| Chuck Size | 8″ (210 mm)& 6″ (170 mm) |
| Bar Capacity Diameter | Ø52 mm&Ø42 mm |
| Spindle | |
| Spindle Nose Type | A2-6&A2-5 |
| Spindle Bearing Model | Front NN3020+100, Rear N1017 & Front 7016, Rear 7014 |
| Spindle Through Hole Diameter | Ø66 mm&Ø56 mm |
| Spindle Drive Method | Direct-drive Motorized Spindle |
| Spindle Transmission Ratio | 1:1 |
| Rated / Maximum Spindle Torque | 95.5/170 N·m & 52/109 N·m |
| Maximum Spindle Speed | 4500 rpm & 5000 rpm |
| Axis Travel & Accuracy | |
| Maximum Travel of X/Z1/Z2 Axis | 210+35/510/530 mm |
| Rapid Feed Rate of X/Z1/Z2 Axis | 25/25/18 m/min |
| Guideway Type of X/Z1/Z2 Axis | 35/45/35 mm Linear Guide Way |
| Ball Screw Diameter/Pitch of X/Z1/Z2 Axis | Ø32/40/32 mm*Pitch10 |
| Positioning Accuracy of X/Z1/Z2 Axis | 0.008/1000 mm |
| Repeatable Positioning Accuracy of X/Z1/Z2 Axis | X: ≤0.003 mm/Z1Z2: ≤0.004 mm |
| Motor Power | |
| X Axis Motor | 1.8 kW |
| Z1 Axis Motor | 1.8 kW |
| Z2 Axis Motor | 1.8 kW |
| Power Motor | 4.5 kW |
| Hydraulic Station | 1.5 kW |
| Spindle Motor | 15/26.8 kW & 11/23 kW |
| Water Pump | 0.8 kW |
| Air Conditioner | 0.3 kW |
| Turret | |
| Turret Model | BMT55-12T |
| Tool Change Time (Adjacent Tool / Opposite Tool) | 0.5sec/0.8sec |
| Square Tool Holders | 25 mm |
| Round Tool Holders | Ø40 mm |
| Other Specifications | |
| Standard CNC Controller | FANUC |
| Voltage/Power Requirements | 380V/40 kVA |
| Hydraulic Tank Capacity | 45L |
| Overall Dimensions (L × W × H) | Without chip conveyor: 2200×1600×2100 mm ; side conveyor: 3175×1600×2100 mm ; rear conveyor: 2200×2660×2100 mm |
Key components and brands
| Item Name | Model/Specification | Brand |
|---|---|---|
| CNC System Controller | FANUC 0i-TF (3B) | FANUC (Japan) |
| Servo Drive Motor | bisc12b/3000 (X), bisc12/3000 (Z1/Z2), Ais22/6000 (driven tooling) | FANUC (Japan) |
| Motorized Spindle | Main: DGZYC-20045 Sub: DGZYC-17005 | HAOZHI |
| Spindle Bearings | Front NN3020+100, Rear N1017 & Front 7016, Rear 7014 (P4 Grade) | NSK |
| Guideways | HSR35(X/Z2),HSR45(Z)(H2 Grade) | THK |
| Ball Screw | SDA3210(X/Z2),SDA4010(Z)(C3 Grade) | THK |
| Fixture | Main: 3H-208 Sub: 3H-206 | AUTOGRIP (Taiwan) |
| Hydraulic Cylinder | Main: TK-B853 Sub: TR-A646 | AUTOGRIP (Taiwan) |
| Electrical Components | LC1N0910M5N(AC Contactor) | SCHNEIDER |
| Turret | BMT55-12T | CHENGXIN |
| Ball Screw Bearings | 2562(X/Z2)3062(Z)(P4 Grade) | FAG |
| Lubrication Pump | YET-V2P2 220V | ISHAN (Taiwan) |
| Control Cabinet Cooling | EA-300-1225 | WINHEE (China) |
| Machine Bed | Meehanite Cast Iron One-piece Slant Bed with Electro-Hydraulic Integration | In-house |
| Hydraulic Components | Hydraulic Station Assembly | HOMN / HYKO |
| Chip Conveyor | Side-mounted chain-type automatic chip conveyor | TONGYI / JIBAO |
Standard accessories
| Item Name | Specification | Quantity | Remarks |
|---|---|---|---|
| Foot Pedal Switch | Green*1 | 2 | |
| Hex Key Wrench Set | 1 | ||
| Leveling Blocks | 6 | ||
| Leveling Screws | 6 | With Machine | |
| Machine Operation Manual | 1 | ||
| CNC System Operation Manual | 1 | ||
| Certificate of Conformity | 1 | ||
| Packing List | 1 | ||
| Laser Calibration Report | 2 | USB Disc | |
| Stainless Steel Tubing | 1 | ||
| Reduction Sleeve (Ø32) | Ø20, Ø25, Ø32 | 3 | 1 Each |
| Tool Clamping Block | 6 | ||
| Chuck Wrench | 8 Inch&6 Inch | 1 | |
| Packing List | 1 | ||
| Items not installed on the machine will be placed inside the accessory box | Items not installed on the machine will be placed inside the accessory box | Items not installed on the machine will be placed inside the accessory box | Items not installed on the machine will be placed inside the accessory box |
Specifications may change. The final configuration is confirmed in our quotation.
Applications
- Complex turned parts with milled features
- Hydraulic and pneumatic fittings
- Automotive components
- Medical and precision parts
- Bar-fed production cells
Features
- Powered turret for milling, drilling and tapping
- C-axis spindle positioning
- Slant-bed construction with linear guideways
- FANUC CNC control
- Bar-feeder ready
- Second spindle for back-side machining
Available Options
Request Information About This Product
Tell us your quantity and requirements — we reply within one business day.
Related Products
Turn-Mill Centres
Turn-Mill CentresCNC Machine Tools
C250M-500 CNC Turning Milling Center
C250M-500 CNC Turning Milling Center: maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø72 mm. Request a quote.
Ø425 mm · 510 mm · Ø72 mm
Turn-Mill CentresCNC Machine Tools
C200M-500 CNC Turning Milling Center
C200M-500 CNC Turning Milling Center: maximum turning diameter Ø425 mm, maximum turning length 510 mm, bar capacity Ø52 mm. Request a quote.
Ø425 mm · 510 mm · Ø52 mm
Have a product requirement?
Share your specifications and quantities. Our team will review your request and come back with sourcing options and a quotation.